Dj TT TSI Challenge

As many of you know I am wicked busy and there are many things I want to offer the community that get put off.

Fortunately for me there are many great people here that have picked up the slack and helped out in big ways (you know who you are!) :D So here is my newest attempt to turn an important task over to you, the community.

I want to offer up a challenge for anyone to modify the Traktor pro 1_3 TSi file in the following way:

1. Change Deck C control to completely swap deck's A/B to decks C/D
2. In this mode deck load also loads into C/D

Here is the kicker, a real modifier challenge for those of you that are really smart!

we need to expand deck copy to all four decks so:

• you press deck copy and it toggles into deck copy mode.
• then you can press any deck button A/B/C/D (assuming up is C and down is D) this becomes the source deck.
• you can then press any other deck and this becomes the destination deck.
• that final press exits deck copy mode

I know its possible but I really don't have time to add this functionality right now. Who wants to try and tackle this one for major props and a free t shirt?

I don't have the SE firmware but I could do this with modifier codes and someone can just replace the commands. After the tsi I built for my Remote 25SL I think I can do anything with modifiers.

you would not really need the firmware as all the commands are already there (its just a matter of duplicating them and changing to C/D) the only new commands would be the load section which is the same on 1.2 and 1.3

alright, didn't know if the CC or note commands had been changed.

If no one beats me to it I'll throw something together.

Do I need to download the new TSI or can I just make it's own dedicated thing and send that?

Also, is there a specific modifier number you have unused right now?

That code sounds strangly familiar :p

Aanrii and i coded that up in Bomes midi pro before Traktor Pro was even out!

I still actually use the same Bomes code today.

This .TSI is just the deck copy and move. You don't need to switch the first set. You hit the preview button and it disables the up/down/left/right for their usual controls.

You select the deck and it activates the appropriate modifier. Then you select the location you want to copy into. :-)

I didn't set the modifier output.

Quick feature: if you hit the preview button and select a deck but decide you selected the wrong deck, or don't want to copy any decks, just hit the preview button again and it resets everything back to normal. I didn't have the VCI-100SE TSI so I only used Modifiers 2 and 3. If those are wrong and you need them on different numbers let me know. :-)

Quote:

---

Originally Posted by BentoSan

That code sounds strangly familiar :p

Aanrii and i coded that up in Bomes midi pro before Traktor Pro was even out!

I still actually use the same Bomes code today.

---

I was just going to say this is wicked easy with Bome's Pro. I'm doing the keyboard version of this but it goes:

Hold Copy Button. Key Down source deck. Key Down Destination Deck.

Quote:

---

Originally Posted by DvlsAdvct

This .TSI is just the deck copy and move. You don't need to switch the first set. You hit the preview button and it disables the up/down/left/right for their usual controls.

You select the deck and it activates the appropriate modifier. Then you select the location you want to copy into. :-)

I didn't set the modifier output.

Quick feature: if you hit the preview button and select a deck but decide you selected the wrong deck, or don't want to copy any decks, just hit the preview button again and it resets everything back to normal. I didn't have the VCI-100SE TSI so I only used Modifiers 2 and 3. If those are wrong and you need them on different numbers let me know. :-)

---

nice one! now I can integrate that into the existing TSi and change C/D and we are good to go :)

:-) I would have done the C/D .TSI but I don't have the file, as I don't have the 1.3 firmware. :)

Good luck with it.