Modding X1 Knobs etc
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Tech Mentor ajrindy's Avatar
    Join Date
    Feb 2011
    Posts
    186

    Default Modding X1 Knobs etc

    I've scoured the forums for as much info as possible but i wanted to ask some questions that would help me find solid answers.
    I would like to modify my Kontrol X1s in a manner similar to this
    big props to Deejaysoul for that, since I am ripping that picture from another thread. Anyway, I am under the impression the knob shaft of the X1 is 6.3mm or 1/4th" but I haven't been able to find confirmation on that, but if I am not mistaken the knobs are D-shaped. Now, I treat my controllers very carefully, and am a bit nervous about just yanking the knobs off the controller. How does one go about properly modifying the knobs without screwing anything up?
    Also, do the different knobs on the X1 have different shaft sizes?
    I would be extremely grateful for guidance and general tips.

  2. #2

    Default

    They're all D-shaped and with the same shaft size.
    It's just that I'm not sure if they're 6mm or 6.3mm, someone would better confirm you first. I changed mine but can't remember if they're 6 or 6.3mm.
    For taking off the knob, don't be affraid : 2 fingers, hold tight & pull them off
    The pot himself is "fixed in the X1", you just can't take anything else apart the knob doing this.
    mintek on mixcloud | http://www.mixcloud.com/mintek/
    xone:92 | 2 x Kontrol X1 | 2 x cdj1000 mkII | pdx-2300 mkII pro | rp-dj 1200 | audio 8 dj | tsp 2.0.1 | live 8 suite | logic pro 9 | komplete 5

  3. #3
    DJTT Infectious Moderator photojojo's Avatar
    Join Date
    Apr 2010
    Location
    Sherman, TX
    Posts
    13,925

    Default

    That's pretty pimp looking. I think they're 6.3, but I'm not 100% on that either.
    Chris Jennings FHP

    Podcast - Soundcloud - Mixcloud - Beatport Charts - x

  4. #4
    Tech Mentor Jason Cerna's Avatar
    Join Date
    Jan 2011
    Location
    Blacksburg, VA
    Posts
    329

    Default

    I replaced the majority of knobs on my s4 in January. The exact size is 6mm d/flatted shaft. You can also pickup knobs that don't fit that shaft if the knob you are getting has a setscrew to secure the knob on the pot shaft.

  5. #5
    Tech Wizard hurundi's Avatar
    Join Date
    Jun 2009
    Location
    Switzerland, ZH
    Posts
    39

    Default

    i bought a pair of these knobs to replace two rotarys on my x1 http://cgi.ebay.com/ws/eBayISAPI.dll...AQ%3AUS%3A1123. they should fit (d-shaft) but i could'nt try it as i haven't received them yet (waiting for 3 weeks now). i'll let you know once they arrive.

  6. #6
    Tech Mentor ajrindy's Avatar
    Join Date
    Feb 2011
    Posts
    186

    Default

    Quote Originally Posted by Jason Cerna View Post
    I replaced the majority of knobs on my s4 in January. The exact size is 6mm d/flatted shaft. You can also pickup knobs that don't fit that shaft if the knob you are getting has a setscrew to secure the knob on the pot shaft.
    I just want to throw this question out there because some other people might find it useful (I searched for it before making this thread)
    are the S4 and X1 knob shafts the same size?
    are the knob shafts of the FX/EQ knobs the same as the looping knobs?
    I'm guessing the answer is yes and yes, but It would be great to have confirmation.
    Also, can anyone recommend some places to purchase cool knobs? I have found places on ebay, but I would be happy to have more sources.

    thanks a bunch for the responses guys.

  7. #7

    Default

    Quote Originally Posted by ajrindy View Post
    are the S4 and X1 knob shafts the same size?
    are the knob shafts of the FX/EQ knobs the same as the looping knobs?
    Yes & yes
    mintek on mixcloud | http://www.mixcloud.com/mintek/
    xone:92 | 2 x Kontrol X1 | 2 x cdj1000 mkII | pdx-2300 mkII pro | rp-dj 1200 | audio 8 dj | tsp 2.0.1 | live 8 suite | logic pro 9 | komplete 5

  8. #8
    DJTT Infectious Moderator photojojo's Avatar
    Join Date
    Apr 2010
    Location
    Sherman, TX
    Posts
    13,925

    Default

    Quote Originally Posted by Jason Cerna View Post
    You can also pickup knobs that don't fit that shaft if the knob you are getting has a setscrew to secure the knob on the pot shaft.
    Yeah those big gold knobs more than likely are just round with a set screw. try hardware stores.
    Chris Jennings FHP

    Podcast - Soundcloud - Mixcloud - Beatport Charts - x

  9. #9
    Tech Mentor ajrindy's Avatar
    Join Date
    Feb 2011
    Posts
    186

    Default

    after a while being away from here and not looking at modding, I looked around again this afternoon and have been unable to find as many good knobs as I wanted...
    can anyone clue me in on some good sites to shop for knobs?
    I have a couple, but not exactly the ones that I would like.
    thanks guys

  10. #10
    Tech Mentor
    Join Date
    Sep 2009
    Location
    Bronx, NY
    Posts
    136

    Default

    Quote Originally Posted by ajrindy View Post
    I've scoured the forums for as much info as possible but i wanted to ask some questions that would help me find solid answers.
    I would like to modify my Kontrol X1s in a manner similar to this
    big props to Deejaysoul for that, since I am ripping that picture from another thread. Anyway, I am under the impression the knob shaft of the X1 is 6.3mm or 1/4th" but I haven't been able to find confirmation on that, but if I am not mistaken the knobs are D-shaped. Now, I treat my controllers very carefully, and am a bit nervous about just yanking the knobs off the controller. How does one go about properly modifying the knobs without screwing anything up?
    Also, do the different knobs on the X1 have different shaft sizes?
    I would be extremely grateful for guidance and general tips.
    Thanks Ajrindy, yes the knobs I used are for 1/4" shaft and also fit using a set-screw which means I cant pull the knob off during a gig. I forgot the height of the shaft, but lucky the knobs I used set screws, since some of the knobs have a deep inset. So it allowed to set it higher especially with pull down encoders. I got the knobs at Radio Shack. I used a mix of 1" & 3/4" knobs, they feel better the 1/2 knobs the S4 and X1 had.
    MBP i5 13", NI Z2, 2x NI X1, 2x NI F1s, NI Audio 8, A&H K2, Rane 2016, 2x 1210MK2e, 2x CDJ-400s, RMX-1000, NI S8, MBA 11"

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •