Denon MC6000

[the_bastet]

Anyone know if my innofader will fit in an mc6000?

[robdquick]

No idea, but if you find out let us know, as I would possibly be interested in doing this at some point!!!

[the_bastet]

Also, are its inputs integrated with the soundcard so i can use it for dvs with traktor.

[SlayForMoney]

for traktor dvs you need traktor soundcard & mc6000 set up as a any other external analog mixer.

[mdcdesign]

According to the Denon forums, an innofader is too deep for the MC6000 unfortunately.

A MINI Innofader might fit, but you'll need to crack the unit open and do some measurements.

[the_bastet]

Id cut the bottom or build on to the top. So the inputs are not connected to the audio interface of the mc6000? Is there a controller which has 4 channel mixer with phono inputs which can be used as a dvs soundcard?

[the_bastet]

I would go with an s4 but I dont like that channels a and b lack audio inputs.

[geminimech]

Any i/o you see on the back of a controller is connected to the audio interface. There is only one controller that you can use for DVS with Traktor, and not surprisingly it belongs to Native Instruments. There are definitely mixers with compatible interfaces for Traktor out there though, including a Xone:4D which I guess you could include in the 'controller' discussion.

[the_bastet]

If the inputs on the rear are conntected top the built in soundcard you should be able to route them in traktor via ASIO drivers.

[geminimech]

If you want DVS functionality within Traktor, you need an A10/A6. The Denon soundcard is not scratch certified. If it is 8in/8out, there are plenty of situational permutations available to you for the unit, but scratch functionality is not one of them. Bottom line, you will never have scratch functionality without an A10/A6 plugged into the back.