Jogs wheel FX
Results 1 to 9 of 9

Thread: Jogs wheel FX

  1. #1
    Tech Wizard jpdretro's Avatar
    Join Date
    May 2012
    Location
    Bromont/Montréal,Québec
    Posts
    55

    Default Jogs wheel FX

    I would like to know if it's posible to map the jogs for FX amount in
    the Traktor S4 User.
    I have put shift as modifier :1
    than pitch bend left arrow modifier:2 toggle
    after that knob 3 for the amount on the left jog wheel
    and knob 3 as a encoder.

    It work for the effect amount but the jogs still move.
    I try putting the mod at m2=0 but i don't find the sracht mod anymore.

    to keep it short. I would like to go in jogs mode FX with a modifier in the S4 User
    with-out switching to midi mode or go in to the preferences.

    Thank's
    Montreal
    https://www.facebook.com/Nearfield.M...ref=ts&fref=ts
    Traktor, S4, F1, APC40 and twister

  2. #2
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    You need to set M2=0 to jog touch, pitch band and scratch commands. Also make sure to override modifier - if there comes any mapped to touch sensitive part of jogwheel.

  3. #3
    Tech Wizard jpdretro's Avatar
    Join Date
    May 2012
    Location
    Bromont/Montréal,Québec
    Posts
    55

    Default

    Thank's for your answer Stewe

    That's what I have found, that reffer to the jog.
    Wich one should I put the condition of M2=0

    Menu: Deck common} - jog touch on
    - jog turn
    - tempo bend
    - tempo bend (stepless)

    I don't find the scratch commands ? in the controller manager. use to be in the older version.
    Montreal
    https://www.facebook.com/Nearfield.M...ref=ts&fref=ts
    Traktor, S4, F1, APC40 and twister

  4. #4
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Yep, in newer versions banding and scratching can be performed using the same command "jog turn", the difference is only in rotary sensitivity values.

  5. #5
    Tech Wizard jpdretro's Avatar
    Join Date
    May 2012
    Location
    Bromont/Montréal,Québec
    Posts
    55

    Default

    Personal: Is it ok if I call you Stewe?
    Thank's again for the infos on the jog wheel, I didn't answer I was out of service for 2 week's.
    Still I think i'm going to deal with that mapping problem first...

    Retro
    Montreal
    https://www.facebook.com/Nearfield.M...ref=ts&fref=ts
    Traktor, S4, F1, APC40 and twister

  6. #6
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    It's my username so yes that would be appropriate I guess.

  7. #7
    DJTT Tankard fullenglishpint's Avatar
    Join Date
    Aug 2010
    Location
    St Albans, UK
    Posts
    7,097

    Default

    No, you can call him 'minister' or 'the honourable gentleman'.
    TSP 2 | Serato DJ | Live 8 | MBP (SSD + HDD) | AIAIA TMA-1 Fool's Gold Edition | 1200 Mk2s | MidiFighter | KRK RP5
    Xone: DB4 | Pioneer CDJ-2000 Nexus
    DJTT FAQ | Read my guide to AUDIO CABLES

  8. #8
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Quote Originally Posted by fullenglishpint View Post
    No, you can call him 'minister' or 'the honourable gentleman'.
    Thanks for kind words mate, I'm all

  9. #9
    Tech Mentor 0Notice's Avatar
    Join Date
    Aug 2012
    Location
    Dallas, TX
    Posts
    478

    Default

    Quote Originally Posted by fullenglishpint View Post
    No, you can call him 'minister' or 'the honourable gentleman'.
    Wow... I'm kinda giggling.
    Mapping Enthusiast
    S4 | X1 | F1 | MF3D

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •