Traktor one button looper

[shroombeats]

Hey guys. Is it possible to map a one button looper in Traktor? What I aim to achieve is to have a button that sets Loop In on first tap, Loop Out on second tap, and clear the loop on third tap. I played around with modifier but couldnt get it right. Any help would be appreciated!

[DJAdeSands]

Yes, I think that's going to be ok to do..
Set as following

Button press 1 = Loop in / Modifier 1 =1 (M1=0 M2=0)

Button press 2 = Loop out / Modifier 2 = 1 (M1=1 M2=0)

Button press 3 = Clear loop/loop active toggle off (depends if loop is mapped to a cue point)
Modifier 1 = 0 (M1=1 M2=1)
Modifier 2 = 0 (M1=1 M2=1)

See if that is of any help.
This is totally off top of my head, I'm AFK at the mo, but any issues I'll get it going on my computer and screenshot it for ya.

Remember to set your modifiers outside the parameters of other functions within traktor, incase they interfere with the interaction of other commands.

[DJAdeSands]

Edited. Problem fixed. See below.

[DJAdeSands]

Got it.



Loop is mapped to L.
Modifiers set to 7 and 8.
Set in version 2.0.3. I test mapping on this one.

Loop active settings.

[shroombeats]

wow. thanks for the detailed reply DJAdeSands

I will try this out soon as I get home!

[DJAdeSands]

Any issues, shout, the pics are a more accurate representation.
The pics are for one deck btw. It's gonna be a matter of dynamic duplication.

[Patch]

Nice work. That's a really elegant solution.

[Stewe]

DJAdeSends - not sure why there should be two modifiers involved.

Pretty much all you need is one incremental value modifier for such a button.

M1=0 --> M1=1 --> M1=2 ---> M2=0 ...

[DJAdeSands]

Yea stewe, it can be done that way too, dunno, just the way I did it I suppose,

[shroombeats]

DJAdeSends - not sure why there should be two modifiers involved.

Pretty much all you need is one incremental value modifier for such a button.

M1=0 --> M1=1 --> M1=2 ---> M2=0 ...

Hey Stewe, how does this one work?
DJAdeSends I followed your way but it doesn't seem to work. Here's a screenshot. What did I do wrong? lol!

Screen Shot 2016-03-16 at 11.25.58 PM.jpg