How to sync 2 Traktor's with this setup

[canon1nd]

OK U just
1.set TRAKTOR SLAVE machine to EXT Clock
2.Enable midi port that you want to receive MIDI CLOCK no mapping need
3.Send MIDI Realtime START ---- then Traktor slave MASTER CLOCK will Follow MDI CLOCK MASTER Automatically....then U just press sync button in each deck for sync with master clock

[kosmo_]

the bpm will wobble, but the audio will be in time, what i do recommend tho is mapping the sync button from the master clock to a button on ur midi controller. we found we needed to press it every half hour or so to prevent any drift

ok, thanks for the tip buddy, sounds very useful!

[midiclock]

Hi,

if you have a windows pc,
maybe you want to try my software midiclock.
This way your clock source can be a single point.

Midiclock has dual midi clock output, is fully midi controllable,
the latest beta (http://midiclock.com/midiclock-beta/) supports
fractional tempos.

[Kult of Krameria]

when BPM floats, the audio change and become out os sync.in the setup early in the post ( 1 MAC send master midi clock to a Windows PC ) i want to know the best and perfect way to Sync Via MIDI cable.
in a windows PC i Used a Roland S-MPU64 to Midi Cable connect.

any help?
thanks

[djchriswoods.co.uk]

it sound like you just need to spend more time dialing in your offset and latency, it does take time