Monitors and an Audio 2?

[aligned]

So if I have KRK Rokit 6 monitors and an NI Audio 2, is it ok to just use an rca splitter cable to connect one output to both of the unbalanced monitor inputs, and use the other to cue with my headphones? Am I missing something here? Is that bad to split like that?

[towifer]

Nope, as far as i'm aware thats perfectly fine!

[aligned]

So what's the point of these other cards having balanced outputs and dozens of rca outputs? Is there really no downside to splitting the out like that?

[MrPopinjay]

You can run balanced outputs over longer distances without a drop in quality.

[Nales]

Multiple RCA inputs/outputs can be used for recording, booth monitoring, split channels by deck. XLR outputs are if you need to travel long distances to get to the main system.

You are perfectly fine what you are doing. RCA left go to left speaker, RCA right go to right speaker.

[aligned]

So even though I'm splitting one 1/4" stereo output across two speakers, that's fine?

[Nales]

So even though I'm splitting one 1/4" stereo output across two speakers, that's fine?

yes, you are just splitting the channels to left and right. This is what you want to be doing.




Uploaded with ImageShack.us

[aligned]

Oh, ok. Thanks so much for the help! I was just worried that splitting it would have been bad, since all the other cards I'd seen had separate L/R outputs. Thanks!

[fullenglishpint]

It's because TRS (3 core jack) cables have 2 different uses:

- One TRS can carry an unbalanced stereo signal (as is produced by the Audio 2) which is exactly the same as having 2 unbalanced mono RCA outputs like you get on an audio 4
- Each of a pair of two TRS cables can carry a balanced mono signal (so 2 gives you balanced stereo) which requires 2 separate balanced mono outputs (like you get from an S4)

Unbalanced is generally fine for short distances.

[TommyQuiet]

Can not wait to get home and use monitors been using shitty speakers while I have been out here