Numark IO soundcard. Cant hear music

[geminimech]

You said you have a DJM-600 right?

[Conall]

3 pronged thing? you mean XLR.

You should have your CD players going to your mixers line in, and the master out going to the speakers. with the booth out from the mixer going to the input on the soundcard.

[dj doninelli]

yeah, the both output should definately be loud enough

No that brings me back to my original problem. When i have everything hooked up to the IO i cannot hear the music out of my speakers. I can only hear it if the RCA cable is plugged into my mixer and not the IO.

[Conall]

CD player > mixer > speakers

the IO has nothing to do with your master output

[dj doninelli]

3 pronged thing? you mean XLR.

You should have your CD players going to your mixers line in, and the master out going to the speakers. with the booth out from the mixer going to the input on the soundcard.

My mixer has a master out that users the XLR cables. My speakers have an in and out for XLR cables. The only way that would work if there is an XLR to RCA cable. Is there one?

This is what the back of mixer looks like.

http://www.google.com/imgres?um=1&hl...t:429,r:1,s:20

[Conall]

get an RCA to RCA and hook it up to the booth monitor output on your mixer, with the other end to the input of your IO

this is completely independant of your main output

[dj doninelli]

get an RCA to RCA and hook it up to the booth monitor output on your mixer, with the other end to the input of your IO

That doesnt work cause it wont play music out of my speakers for some reason. Unless the cdjs are in the mixer and not the io. it will record but i cant hear so i cant mix

[Conall]

it will if you have an XLR running from the main output of the mixer to the speakers.

[geminimech]

[Conall]

Hahahahaha i knew you must be busy making a diagram!