VCI-100SE TSI Version 2 Feedback

[JAC]

Also a ? about the pitch control? Is it me or I only get like 3% +/- of pitch range? I for sure am not getting 8-10%..Why is it set like this? If I choose analog fader over relative mode, and choose 8% as pitch range, I get 8%? Please someone fill me in on this? Not all the time we can use beatgrids to mix by.

I think its because by default the fader resoultion is set to something like 29%, change that to 100% and you'll have 8/10 % percent of travel.

[claudek]

hmm.it is a little weird and not getting it . I load a track it it loads 2.8% more than the original pitch. Example the tune is 130 bpm default, when loaded into deck, it says 132.7.When out of relative mode,analig fader, it acts normal. I'm curious about this and the reason.

[sm00sh]

Im having trouble with the filter while engaged in deck C. it seems as if the center indent will not reset the filter to 0% as occurs with the other 3 decks. For example say in deck A I bring up the high pass to 20%, after engaging deck C the filter would then have a 20% variation that never gets reset. Could not find any errors by observing the midi mapping so i was wondering if anyone had any idea what might be causing this. any have the same issue.

to further clarify: TSP 1.1.1 , FW 1.3., TSI version 2_2

p.s. i don't get this problem in 2_1

[Leon.R]

Thx for the all the hard work!

That beiing said - here some things I have noticed:

- Key sometimes activates Effect "2",
- lights of the effects (in particular effect Bank 2) are sometimes incorrect meaning light is lit when effect is on and vice versa.
- When using deck copy the copied deck will not automatically play
- Pitch range does not match the setted range (in preferences) - it is actually much less (maybe 3-5%?)

Traktor 1.1.2
VCI-100 FW 1.3
Stripped Win XP, SP 2


PS: Loving the intuitive Effect and loop controls - would change the config to have control over the deck c and d volume while using deck a and b. Maybe over a modifier - but that might just be my personal preference

[sm00sh]

After a few days of tooling around with the Midi Mapping, I have made zero progress. Im still having issues with the Deck C filter reset. It works flawlessly with on my VCI-100 FW 1.3, paired with TSI 1_7. Funny thing is my friend is having the same issue on his nearly identical setup. which leads me to believe others might have the same problem. so I ask, next time your in Deck C use the mouse to offset the Deck C filter. Then see if that value snaps back to 0% once the center indent on the knobs engages. which i believe is Note F0 on Ch1.

Traktor Pro 1.1.1
VCI-100 SE Fw 1.3
TSI 2_2

[soerensus]

Didn't really get through the 13 pages, therefore some repetitions may occur.

1. I'm confused about the fader fx: Is it on purpose that the jog and volume fader both controls the wet/dry knob?

2. The hotkey fx in shift mode are not the same as on the layout.

3. I need away to assign fx to deck c and d. You have to use the mouse to assign bank 1/2 to deck c/d. I suggest that the shift button + the assign bank buttons?

4. the filter doesn't go al the way to 100? I'm not sure if it's a problem with my controller, the tsi or the update ver.?

Great tsi though. Looking forward to 2_2. Søren

[DjHawkeye]

After a few days of tooling around with the Midi Mapping, I have made zero progress. Im still having issues with the Deck C filter reset. It works flawlessly with on my VCI-100 FW 1.3, paired with TSI 1_7. Funny thing is my friend is having the same issue on his nearly identical setup. which leads me to believe others might have the same problem. so I ask, next time your in Deck C use the mouse to offset the Deck C filter. Then see if that value snaps back to 0% once the center indent on the knobs engages. which i believe is Note F0 on Ch1.

Traktor Pro 1.1.1
VCI-100 SE Fw 1.3
TSI 2_2

I tryed now and for me it works. The filter on Deck C is snaps back

[claudek]

yes, the filter is funky on deck c. The reason is the reset is off a little with the 0 position on the VCI-100 or something. I mean the reset is more to the right (say 53%) where as on deck d it is at 50% mark between the knob. strange..Does it really need a filter reset?

[EanGolden]

I can t seem to reproduce the filter bug- but will keep on trying... the filter reset is a work around for 1.3 which has double CC's.

Traktor duplicated our double filter (nice of them) but then we didnt need the double CC's so I had to figure out a way to make it work and the filter reset is the only way. The double CC's will be removed in 1.4

[claudek]

I do not hear any audible differences when compared to A, B, D.
I think it is visual..I do see something weird specific to deck C. To get the "reset" the knob has to be around 53% to work, being 0% hard left, and say 100% far right of the fader knob.
Deck A, C & D reset is at 50%. Only thing I see off here and do not see why it is set like this only to deck C.

Must be a 1.3 thing.