Audio 2 + Monitors

[Ham]

I have an Audio 2 and a pair of Samson Resolv A5s with RCA & TRS output (no XLR), I'm 90% sure this is what cable I need, but I just wanted to make sure, as I couldn't find many (ANY) of these cables in any shops, and I thought what I would need would actually be more accessible.

http://www.ebay.com.au/itm/370746386...9#ht_750wt_956

Cheers!

[CountenanT]

Going by some photos I just googled, the cable will fit - single end into channel A or B on the audio 2, and the split end into each of the speakers.
Whether it's the correct type of cable for the job in question however, I don't know.

[makar1]

Since the Audio 2 has unbalanced outputs, you'd be better off connecting it to the unbalanced inputs of your speakers.

The Audio 2 comes packaged with TRS to RCA cables which should do the job, although you may need an extension lead/longer wire to get a good stereo separation between your monitors.

[MaxOne]

Since the Audio 2 has unbalanced outputs, you'd be better off connecting it to the unbalanced inputs of your speakers.

The Audio 2 comes packaged with TRS to RCA cables which should do the job, although you may need an extension lead/longer wire to get a good stereo separation between your monitors.

+1

[Ham]

Since the Audio 2 has unbalanced outputs, you'd be better off connecting it to the unbalanced inputs of your speakers.

The Audio 2 comes packaged with TRS to RCA cables which should do the job, although you may need an extension lead/longer wire to get a good stereo separation between your monitors.

Ah, I did not know the Audio 2 had unbalanced outputs, that answers a lot, I will try and find a longer TRS to RCA cable, as you're right, the one supplied is not long enough.

Thanks a lot.

[MaxOne]

a couple of these and split an existing phono

hh05f_pl57m.jpg