how to create multi mode "panel" with traktor and launchpad

[Stewe]

I've check your CNTRL:R file and saw a three modifiers dedicated for banks. Instead there should be just one modifier set to toggle a three different values in each button.


Bank 1) M1=0
Bank 2) M1=1
Bank 3) M1=2

Here you go: mapping DJTT 0.1.zip

[trabz]

I've check your CNTRL:R file and saw a three modifiers dedicated for banks. Instead there should be just one modifier set to toggle a three different values in each button.


Bank 1) M1=0
Bank 2) M1=1
Bank 3) M1=2

Here you go: mapping DJTT 0.1.zip

Hi Stewe thx for your help !

Btw this was a test on the cntrl:r, but on the launchpad it was mapped this way from the beginning, and still I cannot make it work properly with the lights. Driving me nuts

[Stewe]

Hi Stewe thx for your help !

Btw this was a test on the cntrl:r, but on the launchpad it was mapped this way from the beginning, and still I cannot make it work properly with the lights. Driving me nuts

I don't know about Launchpad but perhaps there is a possibility that pads are set in toggle mode or something?

What happens when you try to switch banks by using modifiers and Launchpad?

[trabz]

I don't know about Launchpad but perhaps there is a possibility that pads are set in toggle mode or something?

What happens when you try to switch banks by using modifiers and Launchpad?

Hi !

Still the same as the first posts, changing bank is working, the commands go on or off depending on how I mapped them on the different banks. But the LED feedback is wrong because not taking into account the bank change..

I mapped a fast & simple example for your cntrlr, it is the same kind of mapping I use on the launchpad and the problem is the same aswell

Attachment 25771

In the test;

-"unit on" & "play" should light up when m1=0 and turn off when m1 is switched from m1=0 to m1=1
-"cue" & "cup play" should light up when m1=1 and turn off when m1 is switched from m1=1 to m1=0

Bregs

[zestoi]

there's no toggle mode etc on launchpad pads - unless possibly if youre using automap but ive never used it. youre just using the launchpad connecting directly to traktor yep? i know a fair amount about the launchpad midi implementation and can have a debug if you can attach your demo/test tsi. the attachment from your last post isnt working for me.

fyi i always send a midi value of 4 (not 0) to turn off any launchpad led since that clears the current led and also the copy bit - it switches between 2 banks of values several times a second which is how you can have blinking leds on it. heres the colour values i use.

[trabz]

there's no toggle mode etc on launchpad pads - unless possibly if youre using automap but ive never used it. youre just using the launchpad connecting directly to traktor yep? i know a fair amount about the launchpad midi implementation and can have a debug if you can attach your demo/test tsi. the attachment from your last post isnt working for me.

fyi i always send a midi value of 4 (not 0) to turn off any launchpad led since that clears the current led and also the copy bit - it switches between 2 banks of values several times a second which is how you can have blinking leds on it. heres the colour values i use.

Hey

About automap, I installed it on my computer to use ableton live. Then I got traktor but I don't remember how went the configuration; if they asked me if I wanna use automap or whatever.
I just open Trakor and launch my cfg, I don't launch automap.

Here you go for the tsi file (the last one I posted is for a Livid CNTLR:R)
mapping LPAD.tsi

Ok thanks for the tip I'll dig that !

Have a nice day

[trabz]

Hey

About automap, I installed it on my computer to use ableton live. Then I got traktor but I don't remember how went the configuration; if they asked me if I wanna use automap or whatever.
I just open Trakor and launch my cfg, I don't launch automap.

Here you go for the tsi file (the last one I posted is for a Livid CNTLR:R)
mapping LPAD.tsi

Ok thanks for the tip I'll dig that !

Have a nice day

Boys I just realized how stupid I am when I checked my mapping files again and saw that I made a very basic mistake. I'm gonna explain it fast so that I could be helpful to anyone else. Ofc fixed both my CNTRL:R and Launchpad

As it was:

1.jpg

I wanted "play pause" & "unit on" to be activated with LED feeback, when bank 1 is on
and both to be turned off (especially the led feedback) when bank 2 is on
&
I wanted "cue" & "CUP"to to be activated with LED feeback, when bank 2 is on
and both to be turned off (especially the led feedback) when bank 1 is on

Problem is, when I switched from bank 1 to bank 2, then back to bank 1 ; the bank 2 "cup"&"CUP" mapped commands woud be deactivated, as wanted. But LEDs would still be on; pretty annoying

To make it short the problem was that the lights from bank 2 would appear on bank 1.


Here's the solution:

2.jpg

Each command play-pause//cue//CUP//unit on should have 2 out feedback; one for bank1 (m1=0) one for bank2 (m1=1).

On the pic the details concern ony "unit on", the changes must be made for each command.

Hope silly mistake will be helpful !

Thanks for your help anyway