Traktor mapping tips, tricks and questions.

[Stewe]

Thanks ! Now i got it But how do i get only ONE button changing Cue type for all 8 pads on my AFX ? When i duplicate your settings and change modifier for the second pad to "deck A hot cue 2 type =cue, grid, etc.." it doesn't work. This way Note takes the condition of both PAD 1 and PAD 2...

Did you remap your duplicated commands to some other button note? It's not ideal keeping multiple cue type selectors on a single button...

Note that you can map your computer keyboard to do this as well (when you run out of midi buttons )

[starr974]

Hi guys,

I didn't use Traktor 2 and my S2 since 1.5 years.

Yesturday, i plug on my stuff, i did all upgrade (Traktor 2.11) and try to install "Beaubryte Mapping".

But impossible to Import it didn't work (i read on some forum it can't work)

Do you have the same problem? it is a possibility to find a solution or i need to sell my S2 now?

thanks for your help

[Stewe]

Hi guys,

I didn't use Traktor 2 and my S2 since 1.5 years.

Yesturday, i plug on my stuff, i did all upgrade (Traktor 2.11) and try to install "Beaubryte Mapping".

But impossible to Import it didn't work (i read on some forum it can't work)

Do you have the same problem? it is a possibility to find a solution or i need to sell my S2 now?

thanks for your help

It should work just fine - no reason why it shouldn't. Have you ensure to import the S2 MK1 version of the mapping and not S2 MK2 version?

[starr974]

It should work just fine - no reason why it shouldn't. Have you ensure to import the S2 MK1 version of the mapping and not S2 MK2 version?

Yep. It's for S2 MKI. Cause new version of Traktor not compatible apparently....

I'm demotivated if i can't use his mapping

Go see the comments on the Mapping Forum.
Sadly; i'm not alone...

here , a copy/past:

"FABIETTO 2 MONTHS AGO
Hi.. with the latest version of traktor , your map seems to doesn't work anymore. Will you make an update please , in order to can use your map again? Thanks a lot for an answer
Iconvinylrecord BRUNO BASTOS ALVES 23 DAYS AGO
Doesn't work on new version

Wallpaper-1281910 CHRIS 7 DAYS AGO
i wish a new update for this mapping....

ANDREW 1 DAY AGO
same!"

[Stewe]

Have you try importing some other mappings for S2? I just downloaded and imported Beau's mapping in 2.11 without issues:



I used to own S2 MK2 before but as of right now I don't pack any of S2/S4 models to test all four mappings available.

[starr974]

I just tryed Beaubryte's mapping for S2 MKI.

When i import it, i see all the mapping as your screenshot, but the S2 work normally (as Default)

But you're right: I will try to import other mapping for S2 just for test if it work or not.

Maybe it's the Traktor's Upgrade is the cause?

i will try tonight after my work.

[starr974]

ok good news: it works finally

I import other .tsi = OK

I import beaubryte 's mapping and i change "In-Port" option: i choose "Traktor S2 "before is in "N/a" (maybe it's for taht it doesn't work)

And after that, i can play

Thanks for your help Stewe!

[Stewe]

ok good news: it works finally

I import other .tsi = OK

I import beaubryte 's mapping and i change "In-Port" option: i choose "Traktor S2 "before is in "N/a" (maybe it's for taht it doesn't work)

And after that, i can play

Thanks for your help Stewe!

I knew it was just a MIDI Port haha
Glad to hear some good news. Enjoy!

[thictool]

I was wondering if anyone could help me with a mutable FX LED problem.

Essentially I have 4 Decks that I use Delay on separately (meaning I use Delay on only one deck at a time). All Delay FXs are using the same FX Unit (Unit 3). I need visual LED feedback for the Unit On - Off on 4 different buttons. But when I map the 4 button to Unit 3, ALL the buttons light up when I engage only one deck..

is it possible to map the 4 FX Unit Button LEDs so that if one Unit is On, the other 3 turn off?

Ive been mapping for 6 days, and the last two days have souly been down to this issue. Its driving me crazy and I cant go on like this....lol

[Stewe]

I was wondering if anyone could help me with a mutable FX LED problem.

Essentially I have 4 Decks that I use Delay on separately (meaning I use Delay on only one deck at a time). All Delay FXs are using the same FX Unit (Unit 3). I need visual LED feedback for the Unit On - Off on 4 different buttons. But when I map the 4 button to Unit 3, ALL the buttons light up when I engage only one deck..

is it possible to map the 4 FX Unit Button LEDs so that if one Unit is On, the other 3 turn off?

Ive been mapping for 6 days, and the last two days have souly been down to this issue. Its driving me crazy and I cant go on like this....lol

You need a modifier mapped to a buttons. Each button when pressed activates a specific value (1-2-3-4) and sets the value of 0 when pressed again.

Then you can set up four commands for different FX Units and give them modifier conditions i.e. when button 1 is pressed (M=1) the FX Unit 1 LED is ON and all other three units are OFF.

To which controller are you mapping this?