Traktor Duo 2 Setup

[Fourth_Frequency]

Alright so I noticed that the problem seems to be with ASIO4all. If I select a different Audio Device then the song will play as it normally does, but I can only get one controller to be sent to the mixer, rather than having both, which is why I used ASIO in the first place. Any help???

[DvlsAdvct]

Do you have an audio interface?

[Fourth_Frequency]

Alls I have is a Numark CM 200 USB mixer, 2 x Denon DN-S1200's, and an usb hub.

[DvlsAdvct]

I think the issue is trying to use these two different sound cards for each individual channel. Why not just use the Numark channels for each deck and not the Denons?

[Fourth_Frequency]

Would I still be able to control the software with the denon's though? and have them on different channels so I can mix?

[DvlsAdvct]

The decks are being used as MIDI controllers, right? So they have just telling the software what to do. The mixer would handle the audio all in itself.

[Fourth_Frequency]

So technically I should have 4 usbs hooked up to the computer then??? 2 controlling each deck, and then one for each deck going to the mixer?

[DvlsAdvct]

No, you'd need three.

2 for each deck, and then 1 for the mixer.

And in the audio settings you'd set your mixing to external, and designate each deck to a different set of outs on the mixer. This part I'm a little shaky on but double check it in the manual to be sure.

[Fourth_Frequency]

No, you'd need three.

2 for each deck, and then 1 for the mixer.

And in the audio settings you'd set your mixing to external, and designate each deck to a different set of outs on the mixer. This part I'm a little shaky on but double check it in the manual to be sure.

Thank you DvlsAdvct, I really appreciate it. With your advice, I was able to get everything running smoothly like I wanted it to! Thanks again.


PLUR

[DvlsAdvct]

Never a problem. Now record a mix so we can all get down.