Hawtin Effect

[Stewe]

Cool! I missed the fact the unit must be engaged with d/w down to zero before messing with effect - nice find Just made a button which directly turns unit off and fire up freeze, increased d/w a bit and there it was.

You should add this to ultimate FX thread for sure.

[jthightower45]

Cool! ... You should add this to ultimate FX thread for sure.

I will thx Stewe. I had a lot of commands in my .tsi file so I'll post some basics and let people map on their own. Have a good one.

[TechnoNL]

I'm pretty sure Dubfire uses the Ramp delay with the Feedback button turned ON (3rd par. in advanced mode) on 1/16 and 2nd par. at just about 9/10 o'clock or something

[neilmcm]

Great work guys going to map this to my K2

[neilmcm]

I download the tsi and opened it in traktor but the effects are wrong which unit is the delay and which is the t3 delay.

Sick vid Stewe! You're always putting good stuff together man. I've been getting the Hawtin effect mapped w/ tape delay & dealy both in advanced mode over the past few days. I did so many commands to make it work on my XoneK2, it's to hard to post. Instead I pasted the Hawtin Effect MIDI commands in a .tsi file --->Attachment 15461

Along w/ a photo so people could see where they are mapped.
Attachment 15460
D5 = "C" Button in pic
A#4 = "G" Button in pic
F#4 = "K" Button in pic
D#0 = "Exit Setup" Button in pic
CC17 = Left Fader in pic.
CC18 = Middle Fader in pic.

Stewe, do you mind sharing the .tsi file for your Livid CNTRLr just isolaating the (2) buttons & (1) fader you use w/ any mods for the Dub Fire effect? That may be an easy way to share the info without having to re-write everything in a post? Thx bro.

[neilmcm]

jthightower45 Thanks for the tsi mapped to my K2 4 buttons and 2 faders got the effect working for unit1 tape delay but unit doesn't come on , is there some order the buttons need to be pressed in order for the delay to come on .

[jthightower45]

jthightower45 Thanks for the tsi mapped to my K2 4 buttons and 2 faders got the effect working for unit1 tape delay but unit doesn't come on , is there some order the buttons need to be pressed in order for the delay to come on .

no prob, I'm in the process of simplifying the .tsi so it isn't such a mess.

in the meantime here's a description based on this pic ---> photo (3).jpg

[Exit Set-up Button] map to select advanced mode for FX1 & FX2, along w/ Tape Delay on FX1 and Delay on FX2.
[K Button] Sets knob 1, 2, 3 parameters & D/W on FX1 & FX2. Remember FX1 need D/W @0% on FX1. Also this button also needs to turn FX1 "ON". This is key, because the unit must start in "ON" position to capture the effect.
[G Button] Activate button 2 & 3 on FX1, while turning "OFF" the FX1. Also, reset's D/W to 0%.
[C Button] Activates Delay on FX2. wich causes the track to freeze.
[Left Fader in pic] controls the DW on FX 1 to bring in the Hawtin effect
[Middle Fader in pic] Controls Knob 3 on FX1 to speed up or slow down the effect.

Hope that helps. I'll post .tsi when i'm done on this thread.

[jthightower45]

I download the tsi and opened it in traktor but the effects are wrong which unit is the delay and which is the t3 delay.

Tape Delay is on FX1 & Delay is on FX2. Effect Selector could be wrong because of the order of your effects vs. my order in Traktor. I map w/ xtreme mapping on my Mac. Makes things a lot easier. So that is how my .tsi files are saved.

This explains more: Effect Selection

[neilmcm]

Thanks will have a play around tonight with the settings , I looked at your mapping and mapped each command to the same button you have selected .

Tape Delay is on FX1 & Delay is on FX2. Effect Selector could be wrong because of the order of your effects vs. my order in Traktor. I map w/ xtreme mapping on my Mac. Makes things a lot easier. So that is how my .tsi files are saved.

This explains more: Effect Selection

[Konix]

Thanks, I made a video showing how to do all this for anyone else interested (also give thanks to you jthightower45 at the end of the video)...