-
Tech Mentor
Deckalized mapping + Seek Position function
Hey whats on the go DJTT
I got my midi fighters yesterday and while I was playing around with it I found that where I don't have many load markers set it was hard to cue up some tracks. I opened up the .tsi and had a look around to see if I could find any free buttons.
While there were no empty spaces per say, I made a little substitution:
When the shift function is active (M7=1) the tempo bend and pitch adjust buttons act as cue 1-4. I dont see the reason to have cue 1-4 mapped and then have 8 cue points in juggle mode too. So I mapped the "seek position" function to the 4 bottom triggers while M7=1.
I have Seek Position Coarse Inc/Dec at C2/D#2 and Min Inc/Dec on C#2/D2 respectively.
It appears that I can't upload the .tsi for some reason. Hopefully someone will help me out haha.
Pork
-
Try putting it on hotfile/rapidshare/etc.
And I've implemented a similar idea in my MF Aux mapping (coming soon...) But used beatjump instead.
-
Hi Fellas ,
Have you had a go at installing the new firmware option? That includes the 4 Banks mode which makes it possible to program 4 x 12 buttons + shift-actions if you feel like.
I am in a process of getting it done & it's pretty much 85% complete. This will include complete browser control on one page & FX/Loop juggle on the other. Pages 1 & 4 with Tactile Deck Control + 4 Cue points each.
This will propably make my other midi controllers obsolete..... ; )
Regarding the TSI file upload I agree with above, maybe try a file-share client like Mediafire or something ?
-
I've looked at 4 bank mode and decided I can do better... I've got 4 extra buttons so I'm going to add 2 crossfaders, 2 knobs and four buttons. The plan is the 4 buttons will become bank/deck focus buttons giving me a 4x4 setup than can be easily switched through decks.
-
Tech Mentor
I have a test to study for so I can't be messing around with the fileshare til tomorrow night.
I mapped my scs 3m for my mixing now because it seems better then running the channels out from audio 8 to dnx120 mixer. Its also alot less wires. I almost had all three without an external power to the usb but some of the midi notes were getting tangled up.
I dont know if I am going to venture into the 4 banks. I like to keep the controls as simple as possible. I was having trouble with the seek position to drop cues but this morning I had some practise and now its pretty smooth.
Now that I am thinking about it. Maybe 4 bank mode wouldnt be too bad. I have two midi fighters so maybe I could have all the transports of each deck on one midi fighter and all the fx and cue points on the other. haha I think I'll master the deckalized mapping first.
-
Tech Mentor
So I managed to upload the tsi
Just a quick over view again (sorry I dont have pictures I can barely get a post up on these forums with text in them haha)
Only a minor mod to the deckalized mapping:
before when you press shift and used the pitch bend or tempo bend controls you would get cues 1-4. I have it set to do seek position. Outside buttons are coarse and the inner two are set at min.
So seek a couple bars before you wanna drop the cue and hit play and shift+ cue to drop the cue.
I thought it was a bit sluggish but it was actually me. I can use it with speed and accuracy and it works fine. Now onto getting the timing of the slicer down to record deck "slice-o-pizzas"
Heres the rapidshare link:
forgive me if this still doesnt work I'm trying to figure out how to use rapidshare.
Pork
[ame]http://rapidshare.com/files/431517128/Deckalized_Seek_Position.tsi[/ame]
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks