Originally Posted by
knaumov
Probably the logic board is the base for the built-in rubber buttons in the S4. That means that if you try installing the arcade buttons, you won't be limited by the S4's case depth but from the space between the upper plate and the logic board beneath it.
The VCI-100 arcade mod is only possible because the low row of buttons were on mini board below the jogs. With S4, it will all depend if it has only one huge logic board with all buttons/jogs/knobs/faders on it or it has several smaller boards. You cannot drill to make a whole in the board and then re-wire the arcade buttons ...
Bookmarks