-
-
DJTT Infectious Moderator
I can't find much info on those speakers. They should all connect to one thing which I think is the sub in your case. Then your Aduio2 will connect to the in on the sub. A cable like this should be what you need.
http://www.buy.com/prod/belkin-y-aud.../10029279.html
As far as cueing goes your headphones will connect to the other out on the Audio 2. You'll then set up the routing preferences in your software to be able to cue.
-
Yes your right about how all the speakers connect to the sub. I'm a little confused about the link you sent me (2 RCA Male to 1 Stereo Male). Doesn't the Audio 2 DJ come with 2 sets of wires that connects from the Audio 2 DJ to 2 Male RCAs? So for conversion wouldn't I need from Female RCAs --> Male Stereo Headphones --> Subwoofer?
Here is the PDF manual for my speakers: http://dl.owneriq.net/4/4f87f3b1-e6b...b32575f291.pdf
Thanks for the quick reply btw
-
DJTT Infectious Moderator
My bad you're correct. Or you could get a 3.5 mm - 3.5 mm stereo cable and use a headphone adapter into the Audio 2.
-
Oo I see. Thanks for clarifying the outs and ins of the Audio 2 DJ. It seems like I can't connect 4 speakers to it AND headphones since theres only 2 outs. Ah well
-
Tech Mentor
i made that mistake with my first soundcard. after a little while i got lucky and a fellow dj in town was selling his presonus firebox for super cheap......
-
DJTT Infectious Moderator
Do the speakers not connect to the sub in that speaker set? There are no input's on the Audio 2 only outs.
-
My mistake I got the ins and outs confused. I mean to say that theres only 2 OUTS on the Audio 2 DJ.
Yes the 4 speakers do connect to the sub. But the problem is, is that theres TWO stereo outputs coming out from the sub: One stereo output for the 2 Front pair speakers and another for the 2 Rear pair speakers. I want to connect these two wires to the Audio 2 DJ AND the headphones to cue the next track but theres only 2 outs.
-
Tech Mentor
I could be wrong, but I'm pretty sure you cannot without a poweramp. You can't directly hook the speakers to the sound card. It has to connect through a power amp. If these are just regular computer speakers.
Can anyone confirm this?
-
Tech Guru
if i'm reading this right, can't you just use an adapter to hook the sub to the A2, then link the speakers to that. and use other hole for headphones?
failing that, cut the plugs off the ends of the cables, strip them back a bit to expose the wiring, twist them together, use sticky tape to hold it neatly and solder it into the A2?
Win 7 / 2x Reloop Contour / Numark M6 /Traktor Pro 2.5
SoundCloud
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks