-
Problem upgrading firmware
I've followed the video perfectly but still get the following:
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM1'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM1' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Attempting 4800
Attempting 2400
Attempting 1200
Error No 15024: Boot failed
MY Serial port is enabled in my BIOS, tried AUTO and tried different IRQs. Tried setting different Com settings: 1, 2, 6. I know it enters boot mode because of no lights. I am using a standard serial cable with a gender changer because the cable I have is female to female.
-
Mr. Golden
people have had problems with gender changers and you may want to try other com ports too- i think the rule was something over 2 or 3- check out the problem thread for more details.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks