Traktor mapping tips, tricks and questions.

[Stewe]

Add Out > Loop Recorder > Playback Position
-controller range 0.5 to 1.0

Put loop on play and button should blink on second beat.

[Deniz343]

Thanks man. It worked. I used 0.6/1.0

[Stewe]

Duplicate same command few times and assign different values. For example first would be 0 > 0.2 second 0.25>0.45 etc...

[Deniz343]

I have one more thing to ask you, how can I blink Hi Kill led when Hi Kill is active ?

[Stewe]

Place a modifier there and put it's value to loop rec position.

[Deniz343]

Place a modifier there and put it's value to loop rec position.

How do I set the modifier value to loop rec position ?
I know how to use modifiers but the values I know only "off, on, 1-7, Deck A-D"

[Stewe]

If high kill modifier is M1=1, then assign M1=1 for loop rec output.

[Deniz343]

Okey I'll try it in the morning.

[Dax]

many thanks for your reply.

the instructions you gave - do they apply to each new button in create for c/d?
im a bit confused.
if possible screen shots with explanation to assist
i was able to create my own mapping for my controller, that seemed easy enough. Once i get an understanding i'll be good and thank you again.

[Stewe]

many thanks for your reply.

the instructions you gave - do they apply to each new button in create for c/d?

Correct. Every single command for decks C and D must be assigned with modifier condition in order to work when dedicated condition is active.