Traktor mapping tips, tricks and questions.

[Stewe]

1) For trigering 2 FX units ON at the same time. I've heard the term hold interactive , but can't seem to find where it is set up.

Map both 'Unit On' commands to the same button on your controller and set interaction mode to 'hold'.

2) How can I make the F1 to switch from remix decks mode to Effect controller mode.. Is it with modiers? I was thinking on pressing pad 19 + some other button to switch back and forth.. But can't figure that out.

The F1 remix deck functions communicate with Traktor in HID mode. To be able to do some of your own mappings you need to activate MIDI mode on your controller (http://www.native-instruments.com/fo...ion-be-careful).

[thj17]

Hi Guys!
It's been a while since I came here and also since I touched my mapping for my ZOMO MC-1000
I promised to post but never ended it...so I started back with fresh ideas and hopefully this time will post it (even if there's not many user of this controller)

Stewe helped me a lot a few months ago but I'm still facing a problem
It's with the FX sTORE preset function

I will simplify it
DECK A with 2 FX UNITS (1 & 3)
FX1 is an independant unit with it's 4 knobs and 4 buttons + an fx selector (rotary encoder)
FX3 is reserved for instant press effect and toggled fx (like echo freeze)

On FX3 if I use echo freeze I use the FX store preset when turning it on and again when turning it off so no problem here
the problem is with the instant press fx like beatmasher (used as a roll) and ramp delay
When I press I need the FX store preset function (otherwise I need to press it twice)

Here comes the problem (whenever I scroll the FX on unit1 ...I hit beatmasher or ramp delayand they are ON since I stored them that way)

Is there a walk around or something I'm missing?????????????????? (+what it's happening with FX STORE preset, button trigger with INVERT selected)
PLEASE help me!

Thanks
JT

[Stewe]

Hey JT,

Go ahead and map Button On / type=button / interaction=direct / value=0 so each time you turn the encoder to scroll trough effect list each previously stored effect will automatically go off since that encoder will constantly send FX=off command.

Let me know if that could be helpful.

[thj17]

Hey JT,

Go ahead and map Button On / type=button / interaction=direct / value=0 so each time you turn the encoder to scroll trough effect list each previously stored effect will automatically go off since that encoder will constantly send FX=off command.

Let me know if that could be helpful.

When I read I was like OMG it's that simple....but it does not work

The recall of the preset is probably happening after the unit on turn to 0

REALLY GOOD TRY
Thanks!

[Stewe]

When I read I was like OMG it's that simple....but it does not work

The recall of the preset is probably happening after the unit on turn to 0

REALLY GOOD TRY
Thanks!

You have mapped the store preset to the encoder CC as well?

[thj17]

No I didn't

No I did and IT WORKS

Thank you very much....you're definetely the king of mapping

[Stewe]

You are welcome and thank you for your compliment!

Regards,

[NJGDJ]

Hi

Can some1 please tell me how to may the grid analysis lock using the S4?

Thanks

[clockwise]

Hello all, hope someone can help me :

I'm trying to make my own personalized MF3D mapping. FX Unit 4 is in single mode, for the "dubfire - ramp delay" by Stewe. My problem is, i want the same FX-Unit for an echo-freeze, toggle mode. When i activate a ramp-delay button and keep it pressed, then toggling the echo freeze, the buttons are not toggled the way i want: FX-unit sets to off, while the freeze button is set to on, and vice versa. Doing the same while using the echo freeze as hold, it works perfectly. But i want to toggle it.

If something is not clear, ask away

Thank you in advance!

clockwise

[Stewe]

Hello all, hope someone can help me :

I'm trying to make my own personalized MF3D mapping. FX Unit 4 is in single mode, for the "dubfire - ramp delay" by Stewe. My problem is, i want the same FX-Unit for an echo-freeze, toggle mode. When i activate a ramp-delay button and keep it pressed, then toggling the echo freeze, the buttons are not toggled the way i want: FX-unit sets to off, while the freeze button is set to on, and vice versa. Doing the same while using the echo freeze as hold, it works perfectly. But i want to toggle it.

If something is not clear, ask away

Thank you in advance!

clockwise

Sounds like missing Store Preset command mate. You have it mapped to effect ON button?