New firmware Midifighter-20110204

[lassemix]

Did you follow the install instructions about installing the drivers found in the directory:

%ProgramFiles%/DJTechTools/MFUpdate/BootloaderDrivers

Simply right-click on the .inf file and select "install".

I might be a total noob. But were do i find the .inf file?
I found all the drivers, but nothing with that ending.
Please help sir.

[Fatlimey]

You may be viewing your directories in Explorer with "file extensions hidden".

http://windows.microsoft.com/en-US/w...ame-extensions

[Gryz]

You may be viewing your directories in Explorer with "file extensions hidden".

http://windows.microsoft.com/en-US/w...ame-extensions

"The INF file you selected does not support this method of installation"


???

[Fatlimey]

"The INF file you selected does not support this method of installation"

Try this:

Attach your MF to your computer via USB, putting your MF into Bootloader mode.
Go to he Device Manager. Right-click the unknown USB device, select Update Driver Software, then "Let me pick", click "Have disk", Browse to the inf file and install.

[Gryz]

Try this:

Attach your MF to your computer via USB, putting your MF into Bootloader mode.
Go to he Device Manager. Right-click the unknown USB device, select Update Driver Software, then "Let me pick", click "Have disk", Browse to the inf file and install.

You sir, are the man. Worked perfectly and got my tsi imported as well.

NOW THOUGH, unlike eans video, where he shows just deck A and B, I also get C and D when I import it. Not a problem, I use 4 decks anyway.

I am not using the S4 but the Hercules Steel and TPRO. All the effects work fine on deck A but will not work on the other decks. It is looking like the FX banks are not being routed to those other decks.

Ideas?

[Bode]

I made a video where you can see my problems.

http://www.youtube.com/watch?v=gDSJ5PH2H_w

[peterimmel]

I've got the following problem:
After updating the MIDI fighter "successfully" the MF seems to send the 'wrong' MIDI commands to Traktor.. It sends everything over CH02 instead of CH03 as its programmed in the mapping for Traktor.. but it still sends the right notes. So actually the connection to Traktor works but the MIDI Fighters sends the 'wrong' MIDI commands.

How can i change it? I tried to update it again but i've got the same problem..

It would be A LOT of work to change all CH03 commands to CH02...

so please help!

[fullenglishpint]

I've got the following problem:
After updating the MIDI fighter "successfully" the MF seems to send the 'wrong' MIDI commands to Traktor.. It sends everything over CH02 instead of CH03 as its programmed in the mapping for Traktor.. but it still sends the right notes. So actually the connection to Traktor works but the MIDI Fighters sends the 'wrong' MIDI commands.

How can i change it? I tried to update it again but i've got the same problem..

It would be A LOT of work to change all CH03 commands to CH02...

so please help!

Welcome to the Forum.

It's in the 'using the midi fighter in menu mode' sticky.

1. MIDI Channel
---------------


Code:
# . . . <- Flashing exit key
. . . .
* * * * <- MIDI Channel in binary
o . . o <- increment/decrement keys

Each note generated by the Midifighter is generated on a single MIDI
channel. By default this is Channel 3, but the first menu item allows you to
change this to any of the 16 MIDI channels. The 4-bit binary value can be
altered by incrementing and decrementing or you can directly toggle bits in
the value itself.

NOTE: MIDI channels are written down as "1..16" but their binary number is
written "0..15", therefore all leds off will represent the binary value
b0000, which is interpreted as "MIDI Channel 1", b0001 is "MIDI Channel 2",
b0100 is "MIDI Channel 5", etc.

Enter menu mode by holding the top left button while resetting the midifighter, press the top left button again and follow those instructions.

[photojojo]

Enter menu mode by holding the top left button while resetting the midifighter, press the top left button again and follow those instructions.

And you do that by plugging in the MF while holding the top left button. It's all in this thread.

http://www.djtechtools.com/forum/showthread.php?t=9961

[peterimmel]

Welcome to the Forum.

It's in the 'using the midi fighter in menu mode' sticky.



Enter menu mode by holding the top left button while resetting the midifighter, press the top left button again and follow those instructions.

Wow!!! Thanks a lot, it works! you just saved my day