Hey, so I put down a beat grid into a song and when I try to sync two tracks, it just sits in waiting mode (half the box turns yellow). I turned the deck master to auto and nothing. Thanks
Hey, so I put down a beat grid into a song and when I try to sync two tracks, it just sits in waiting mode (half the box turns yellow). I turned the deck master to auto and nothing. Thanks
you only gridded one of the tracks? there's the problem. it syncs the grids together so all tracks need to be gridded
you hit sync on the track youre going to bring in, not the one thats playing.
I figured it out. Traktor can only be sync'd at certain bpms, so I manually had to go in and match them after I placed down a grid. Thanks guys
in the prefs you can change your pitch faders range if you need to
Yeah, it wasn't that. I set my parameters to 40 and 300 and still wasn't working. So I switched over to manual
lost... traktor will sync at any bpm. i assume the 40 > 300 is the detection range? that's massive and doesn't need to be so wide, if anything it will cause bigger issues with gridding later.
sounds more like you need to change the pitch range setting in the transport part of the preferences try something higher like 35% or 50%... but that would only apply if you're mixing things with big differences in tempo
Ok, what would happen is I would beat grid the track. Then I would sync, but the parameter on the master track was either too high or too low on the sync track so they wouldn't sync. I had to manually change the master tracks bpm to fit within the parameters of the sync track.
Example: While the master track is bpm at 116, the highest the sync track would go is 104 and would be unable to sync. I had to change the master track's bpm lower to match the 104 and then everything sync'd. I have never seen this issue (I always just used sync with no problems) but hope this helps someone else
change the pitch range in transport section
SOLUTION!!!!
I had the pitch rader preset on 8%, when it can go to 100%. Shout out to BradCee
|
Bookmarks