MF Instant Gratification Mapping v1.0.3

[DJ SeanUP]

enable 4 banks internal mode.

i dont know how to do that can you help me out ?

[willinfluence]

How To Enter and use Menu Mode
20091230: created by Fatlimey

To enter Menu Mode, hold down the top-left key while resetting the
Midifighter. You can power on the Midifigher by either by plugging in the
USB cable, or by pressing an optional 6mm tactile "reset" switch that can be
soldered to the top left of the motherboard.

Continue to hold the top-left key until menu mode is reached, this will take about 2 seconds, you will know you have accessed Menu Mode as the LED will display 7 option keys and a flashing "exit" key:


Code:
* * * * <- Menu items
* * * .
. . . .
. . . # <- Flashing exit keyTo leave any Menu page or the Menu system itself, just hit the flashing Exit key.

Any changes made to the options are only written to the Midifighter if you
exit the Menu Mode through the top level "exit" key - this allows you to
play with the options and be sure your settings are correct before
committing the changes, without having to remember previous values.
Only when you are sure the Midifighter is set up to your specifications
should you use the top level "exit" button to commit your changes.

The seven menu items are:

MIDI channel
MIDI velocity
empty
Enable Keypress LED
Select Fourbanks mode
Select Expansion port Digital inputs
Select Expansion Port Analog inputs

5. Select Fourbanks Mode
------------------------


Code:
. . . .
# . . . <- Flashing exit key
* * * * <- Selection bar graph (three states)
o . . o <- increment/decrementThis menu page allows you to select one of the three bank modes by using the
increment/decrement keys to move through the different options.

. . . . = Fourbanks Off

. . * * = Fourbanks Internal

* * * * = Fourbanks External

NOTE: If Fourbanks External is selected, the Digital Inputs menu page will
be disabled.

[DJ SeanUP]

How To Enter and use Menu Mode
20091230: created by Fatlimey

To enter Menu Mode, hold down the top-left key while resetting the
Midifighter. You can power on the Midifigher by either by plugging in the
USB cable, or by pressing an optional 6mm tactile "reset" switch that can be
soldered to the top left of the motherboard.

Continue to hold the top-left key until menu mode is reached, this will take about 2 seconds, you will know you have accessed Menu Mode as the LED will display 7 option keys and a flashing "exit" key:


Code:
* * * * <- Menu items
* * * .
. . . .
. . . # <- Flashing exit keyTo leave any Menu page or the Menu system itself, just hit the flashing Exit key.

Any changes made to the options are only written to the Midifighter if you
exit the Menu Mode through the top level "exit" key - this allows you to
play with the options and be sure your settings are correct before
committing the changes, without having to remember previous values.
Only when you are sure the Midifighter is set up to your specifications
should you use the top level "exit" button to commit your changes.

The seven menu items are:

MIDI channel
MIDI velocity
empty
Enable Keypress LED
Select Fourbanks mode
Select Expansion port Digital inputs
Select Expansion Port Analog inputs

5. Select Fourbanks Mode
------------------------


Code:
. . . .
# . . . <- Flashing exit key
* * * * <- Selection bar graph (three states)
o . . o <- increment/decrementThis menu page allows you to select one of the three bank modes by using the
increment/decrement keys to move through the different options.

. . . . = Fourbanks Off

. . * * = Fourbanks Internal

* * * * = Fourbanks External

NOTE: If Fourbanks External is selected, the Digital Inputs menu page will
be disabled.

thx you so much great help now it works

[MPHansen]

How To Enter and use Menu Mode
20091230: created by Fatlimey

To enter Menu Mode, hold down the top-left key while resetting the
Midifighter. You can power on the Midifigher by either by plugging in the
USB cable, or by pressing an optional 6mm tactile "reset" switch that can be
soldered to the top left of the motherboard.

Continue to hold the top-left key until menu mode is reached, this will take about 2 seconds, you will know you have accessed Menu Mode as the LED will display 7 option keys and a flashing "exit" key:


Code:
* * * * <- Menu items
* * * .
. . . .
. . . # <- Flashing exit keyTo leave any Menu page or the Menu system itself, just hit the flashing Exit key.

Any changes made to the options are only written to the Midifighter if you
exit the Menu Mode through the top level "exit" key - this allows you to
play with the options and be sure your settings are correct before
committing the changes, without having to remember previous values.
Only when you are sure the Midifighter is set up to your specifications
should you use the top level "exit" button to commit your changes.

The seven menu items are:

MIDI channel
MIDI velocity
empty
Enable Keypress LED
Select Fourbanks mode
Select Expansion port Digital inputs
Select Expansion Port Analog inputs

5. Select Fourbanks Mode
------------------------


Code:
. . . .
# . . . <- Flashing exit key
* * * * <- Selection bar graph (three states)
o . . o <- increment/decrementThis menu page allows you to select one of the three bank modes by using the
increment/decrement keys to move through the different options.

. . . . = Fourbanks Off

. . * * = Fourbanks Internal

* * * * = Fourbanks External

NOTE: If Fourbanks External is selected, the Digital Inputs menu page will
be disabled.

I have tried this but I must be doing something wrong. Using traktor pro 2, an S4, and just got a midi fighter. I'm pretty sure I'm setting it to Fourbanks Internal, but deck B is still not working for me (Deck A working fine though) is there some other setting I might be messing up?

[photojojo]

Do you get the two lights indicating it's in four banks internal? If not then you're not. You may need to reflash the firmware.

[MPHansen]

Yes I get the two lights, how do I reflash the firmware?

[deNarsoy]

hello everyone! i'm a newbie here, still need to learn from all of you the expert dj , i'm trying to map this MIDI FIghter MApping to my own KORG MicroKontrol , i think their both have a similiar button, Wish me luck. : )

oh btw is that okay?

[jay2]

Will there be any future changes/updates for this mapping?

[deNarsoy]

i'd like to know more about its mapping layout. i'd learn from its mapping, thats really cool for me to learn how to mapped into controller if i had a chance .

[willinfluence]

Yes I get the two lights, how do I reflash the firmware?

That means your in four banks mode, so your good to go

To update/re flash your Classic MF (not MF Pro!)

Download the MF updater from the sticky that is found near the top of the Midifighter Resources and discussions page