foot pedal as shift button
Results 1 to 4 of 4
  1. #1
    Tech Convert
    Join Date
    Mar 2011
    Posts
    12

    Default foot pedal as shift button

    yo guys i recently bought an oxygen 25 n was wanting to use a foot pedal as a shift button but i dont know how to map it in traktor for shit hahaa

  2. #2
    Tech Guru TommyQuiet's Avatar
    Join Date
    Oct 2009
    Location
    NorthWest,UK
    Posts
    1,468

    Default

    Just assign it as you would any other button.

  3. #3
    Tech Wizard
    Join Date
    Aug 2010
    Location
    Edinburgh
    Posts
    74

    Default

    I think you'd want to set it up so that in traktor controller mappings when you press it, it changes the value of a modifier. (off the top of my head) Add modifier 1, when m=0, direct, hold, set to 1 at the bottom. Then for your other controls make sure you set the conditions to either m=0 or m=1 depending if you want them as shift functions or not.
    2014 MBP Retina 15" / Maschine Studio / MM-1 / 2x X1 Mk2 / A2DJ / Rokit 5's

  4. #4
    Tech Guru VanGogo's Avatar
    Join Date
    Mar 2010
    Location
    L.A. (lower Alabama)
    Posts
    1,918

    Default

    Also depends on the pedal you are using. A latching type will be on in one press and off on the second press. An unlatching pedal you will have to hold down, or set the button action to toggle with each press.
    As far as making it a shift key, just make the pedal a modifier. So when it is pressed your modifier will = 1 & when not pressed the modifier will = 0.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •