New Midi Fighter Utility 2.40 (updated 10/31/2013) READ ME IF YOU HAVE A 3D - Page 18
Page 18 of 18 FirstFirst ... 81415161718
Results 171 to 177 of 177
  1. #171

    Default

    hey Midifidler, quick question , when switching to the legacy firmware, should the date be the same as when in the new alternate firmware, for some reason i don't see a firmware change between the two, in legacy mode or any other standard or even osx remix the firmware is always "30 May 2012" and says up to date, so i am a little confused as for Eans Jam it on mapping, it says use the old firmware,so i am running into a few conflicts with the mapping, if you could give me a quick rundown on what and how to spot the differences between the different firmware would be appreciated.i only just got my 3D, so am new to how the software runs.

    Thanks

  2. #172
    Newbie
    Join Date
    Mar 2014
    Posts
    2

    Unhappy MidiOutWinMM::openPort: error creating Windows MM MIDI output port.


    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    Attachment 21842

  3. #173
    Tech Student
    Join Date
    Jan 2010
    Posts
    1

    Default

    Quote Originally Posted by dijeyflush View Post

    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiInWinMM:penPort: error creating Windows MM MIDI input port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    MidiOutWinMM:penPort: error creating Windows MM MIDI output port.
    Attachment 21842
    I'm having the exact same problem. using win 8.1

  4. #174
    Newbie
    Join Date
    Mar 2014
    Location
    Italy
    Posts
    6

    Default

    Hi guys,
    I have mavericks and the utility doesn't recognise my spectra.
    How can i do? If i load any mappings in traktor they work, only the utility doesn't recognise it.
    Thanks

  5. #175
    Newbie
    Join Date
    Dec 2014
    Posts
    3

    Default

    Hey,
    just reporting that Utility is not scaled properly when working on UHD resolutions - 3200x1800 and the most information is lost under the graphics. I still can use most of it, but it's not easy.

    kisses

  6. #176

    Default

    Quote Originally Posted by Hef View Post
    Hey,
    just reporting that Utility is not scaled properly when working on UHD resolutions - 3200x1800 and the most information is lost under the graphics. I still can use most of it, but it's not easy.

    kisses
    I have the same issue on my Surface Pro 4.

  7. #177
    Tech Wizard Scoox's Avatar
    Join Date
    Jun 2012
    Location
    Wuxi, China
    Posts
    73

    Default

    Quote Originally Posted by midifidler View Post
    For those having issue with "Failed to find MidiFighter in Bootloader Mode" while using the Midi Fighter Utility.

    I've looked into this and it is having issues with the DFU driver installation.

    Ill fix the installer over the next few days however for those who want it NOW I have prepared the following document detailing how to fix this.

    Windows 7 DFU Driver Fix
    I'm still encountering this problem with v2.85. However, I remember flashing firmware successfully before. could it be that a Windows 10 update has broken something?

    In Device Manager ATXMEGA128A4U DFU Bootloader has a warning yellow triangle icon on it. I had this problem before and the solution was to install the ATXMEGA128A4U DFU Bootloader driver, which I just tried to do, but installation always fails:

    Windows encountered a problem installing the drivers for your device

    Windows found drivers for your device but encountered an error while attempting to install them.

    ATXMEGA128A4U DFU Bootloader
    Am I doing something wrong? Thanks and happy 2020
    Last edited by Scoox; 01-02-2020 at 11:26 PM.

Page 18 of 18 FirstFirst ... 81415161718

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •