The improvised DJ/production desk thread - Page 3
Page 3 of 55 FirstFirst 12345671353 ... LastLast
Results 21 to 30 of 542
  1. #21
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    I'm building one in sketchup, will post in a bit. All Ikea parts, zero cutting.

  2. #22
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    some sketchup fun


    Parts list:

    http://www.ikea.com/us/en/catalog/products/40051196 2x $14.99 each
    http://www.ikea.com/us/en/catalog/products/20054563 3 packs $10 each
    http://www.ikea.com/us/en/catalog/products/70103085 2x $69.99 each
    http://www.ikea.com/us/en/catalog/products/00011013 1x $29.99
    http://www.ikea.com/us/en/catalog/products/50103618 2x 6.99 each

    $242 total

    I am also looking into lighting: http://www.ikea.com/us/en/catalog/products/50192365 maybe 2 of these for one color LED light strip in each of the front cubes, then I would leave it open or put a plexiglass panel in front

    +80 with two light kits and another $40 if I add a plexiglass panel for the front

    The expedits will fit my 2x technics and S4 perfectly. My only thing is the shelf is a little narrow at 10", just enough for a laptop but too small for my maschine and apc40








  3. #23
    DJTT Ninja Mod tekki's Avatar
    Join Date
    Apr 2008
    Location
    Afterhour Ali's lap
    Posts
    11,357

    Default

    What are you going to use to raise the S4?
    RSTRCTD | twitter | facebook (RSTRCTD) facebook (LJ) | vimeo | pinterest | my studio | soundcloud (RSTRCTD)| soundcloud (LJ)
    -- CHECK our DEBUT (DEEP)HOUSE EP RELEASE ON BEATPORT "RSTRCTD - EXISTENCE" --

  4. #24
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    Quote Originally Posted by tekki View Post
    What are you going to use to raise the S4?
    That't the last piece to figure out. Anyone know how high you have to raise it? I don't have my turntables here but will probably use some sort of shelf if there is one the right thickness or I will use a piece of plywood.

  5. #25

    Default

    This last design looks cool.... But will that shelf hold all that weight? Aren't most parts from ikea just particle board?
    M I S T E R M O L E Y M O L E
    part of the digital revolution

  6. #26
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    Quote Originally Posted by MisterMoleyMole View Post
    This last design looks cool.... But will that shelf hold all that weight? Aren't most parts from ikea just particle board?

    You have a point I may have to bolt through in some places if just screwing isn't enough. I may have to spread the bottom two angle pieces further apart or use 3-4 metal angle pieces on the bottom between the long shelf and the expedit so there isn't a big cantilever that the speakers would be stressing.


    edit: I'm thinking 4 capita angle pieces, one centered above each cub on the bottom. I think then there would be no problem. I'm not worried about the wood breaking, just a little concerned that it can be hard to screw securely into it since it isn't very dense.
    Last edited by Xonetacular; 09-19-2011 at 05:13 PM.

  7. #27

    Default

    One thing I did see on another build somewhere was the use of another two angled steels but placing them sloping the other way. It doesn't look as nice but does give more support.
    M I S T E R M O L E Y M O L E
    part of the digital revolution

  8. #28

    Default

    Anyone got anything they can sit and produce at but also stand to mix on. I'm 6ft 1in.
    M I S T E R M O L E Y M O L E
    part of the digital revolution

  9. #29
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    Quote Originally Posted by MisterMoleyMole View Post
    One thing I did see on another build somewhere was the use of another two angled steels but placing them sloping the other way. It doesn't look as nice but does give more support.
    Interesting. I think I'll definitely use 4 on the bottom but I will keep them all angled the same direction. I will see how securely it screws into the particle board. I can always use bigger screws. I'll see how it looks with crossing them but if I can avoid it I would like to.

    I just had an idea... If I use a narrower laptop shelf I can have the speaker stands be separate from it. I can bolt two angle pieces together so one is on top of the other and the sort of jag out and then back in and the top mount is directly above the bottom mount so the force would be straight down. I wish I could find two stainless steel straight pieces with flanges but attaching two angled together is an option.

  10. #30
    Moderator keithace's Avatar
    Join Date
    May 2010
    Location
    SoCal
    Posts
    5,254

    Default

    Mdf + saw + some thought + screws and gorilla glue > anything bought from a store
    Weapons, not food, not homes, not shoes
    Not need, just feed the war cannibal animal

Page 3 of 55 FirstFirst 12345671353 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •