Midi Fighter Utility Problem
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Tech Wizard
    Join Date
    Aug 2011
    Posts
    29

    Lightbulb Midi Fighter Utility Problem

    So a got a weird a problem and the program said that I need to post it here, so here it is:

    Code:
    RtMidiIn::openPort: error creating Windows MM MIDI input port.
    RtMidiOut::openPort: error creating Windows MM MIDI output port.
    RtMidiIn::openPort: error creating Windows MM MIDI input port.
    RtMidiOut::openPort: error creating Windows MM MIDI output port.
    RtMidiIn::openPort: error creating Windows MM MIDI input port.
    RtMidiOut::openPort: error creating Windows MM MIDI output port.
    RtMidiIn::openPort: error creating Windows MM MIDI input port.
    RtMidiOut::openPort: error creating Windows MM MIDI output port.
    RtMidiIn::openPort: error creating Windows MM MIDI input port.
    RtMidiOut::openPort: error creating Windows MM MIDI output port.
    Contacting DJTechTools...
    Downloading HEX file
    Download success
    Putting Midifighter into bootloader mode...
    RtMidiOut::sendMessage: error preparing sysex header.
    Flashing the Midifighter...
    Failed to find a Midifighter in Bootloader mode.
    Cleaning up...

  2. #2

    Default

    I have the same problem and i'm not sure either

  3. #3
    DJTT Super Moderator midifidler's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    1,902

    Default

    It can have an issue if you have any other software which uses midi running at the same time, is it possible you had Traktor/Ableton etc running at the same time?

  4. #4
    Tech Wizard
    Join Date
    Aug 2011
    Posts
    29

    Default

    Traktor wasn't running. ;s

  5. #5

    Default

    I also do not have traktor running when I try the software and it does the same thing.

    Should we try maybe pressing the red switches in the back first?

  6. #6
    Tech Mentor
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    118

    Default

    I've had this problem in both of the following scenarios:

    1. Traktor, MIDI-OX or some other MIDI program was running and was already connected to the Midifighter - at least under Windows, it doesn't seem to be possible to have more than one program connect to a given MIDI device

    2. The USB plug wasn't in properly - the Midifighter was powered, but communicating with it did not work properly

    So check that no other MIDI software is running and that all plugs are properly connected. Also try plugging it into a different USB port.

  7. #7

    Default

    I have no midi software running and it definately looks connected fine and i'm still having issues

  8. #8
    DJTT Super Moderator midifidler's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    1,902

    Default

    Hey Lauren,

    Please confirm the MF is in fact in bootloader mode before you push the OK key.

    In Bootloader mode every other led should be on in a checker board patter.

  9. #9
    Tech Wizard
    Join Date
    Aug 2011
    Posts
    29

    Default

    My leds are like this:
    X = Light
    O = No light

    XOXO
    OXOX
    XOXO
    OXOX

    And then I press ok but it don't works...

  10. #10
    DJTT Super Moderator midifidler's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    1,902

    Default

    Hey Lauren, check the end of the Utility thread - I have posted a fix to your problem. You can find it here
    Last edited by padi_04; 05-27-2015 at 11:09 AM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •