DJTT VCI-400 Ean Golden Edition Mapping (Traktor Pro 2)

**flashflooder** · 04-30-2012, 03:21 PM

I'll get to your guys questions soon when I have a chance; but in the meantime, feel free to check out the first official iteration of my Flashflooder edit VCI-400SE mapping here that I just posted: http://maps.djtechtools.com/mappings/166

I listed the main changes on the MAPS page but I'll put them again here too as follows:

The upper FX sections that controlled Loop Decks C/D now control FX banks 3/4 respectively
The GRATIFY section uses the Beatmasher in FX1-1 on the top/first row, the second row is Reverb, Filt92:LFO, Delay (all on FX2) and a dedicated ECHO Freeze button (this will blink when activated)
You can keep any of the lower row Gratify FX on by pressing Shift+that button (or holding Shift as you release the Gratify button)
Pressing Shift will turn each decks FX1/2 route buttons (under the Filter knobs) into FX3/4 route buttons. The LEDs will change as you hold Shift to indicate which FX are currently routed
The LOOP tab on each deck controls the SLICER single effect on FX3 and will turn on the effect at different STYLE values (1/3/4/5). This can create interesting beat stutter sounds with the buzz rate at 0 (or glitchy sounds with the buzz at positive rates).
The Loop Recorder now has the Dry/Wet mini fader going from 0% to 100%. Button A now sets the Loop Rec to Record and should blink to the master output when not recording (LED should stay on when recording). Button B will Play/Pause and will stay lit if the Loop Rec is playing. Buttons C and D decrease or increase the Loop Rec size. Shift+Button A/B will delete the Loop Recorder.

I hope to make a short video for this sometime soon and also to make some further changes to modes/functions I don't really use (and there are definitely some others). I just wanted to post it so you guys could try it out at this point. If anyone has any major feedback, I'll definitely consider it for future versions.

**groovemixer** · 04-30-2012, 04:37 PM

Sweet!!!!!! Thx for the update gonna give it a try!!!

**Zonta** · 04-30-2012, 06:46 PM

Thanks again flashflooder, you the man.

**tlandrecht** · 04-30-2012, 07:12 PM

Thanks flashflooder! works great! Looking forward to future updates!!

**bascurtiz** · 05-03-2012, 08:21 AM

Is there a way to make the slicer-mode specified for the VCI-400 Ean Golden Edition, work on the Novation Twitch by copying some mapping out of the .TSI ?

**basspenetrator** · 05-03-2012, 10:12 AM

Originally Posted by bascurtiz

Is there a way to make the slicer-mode specified for the VCI-400 Ean Golden Edition, work on the Novation Twitch by copying some mapping out of the .TSI ?

i dont think so. it's the EGE firmware which makes the slicer mode possible..

**thictool** · 05-03-2012, 02:06 PM

Im having trouble figuring something out here while making my own tsi map on the EGE VCI400.

I am setting up my own Cue Banks on the Performance Grids for Deck A,B,C & D (Labeled "CUE"in the Performance Grid section). I am able to set everything up correctly on all Decks, but the LEDs on Deck D seem to stay a solid Red color, while the LEDs on Deck A,B & C all blink Red.

Any clues on this - Like how to change the blinking LED states to solid on Decks A,B & C or how to make Deck D LEDs blink?

Any insight would be really helpful

Thanks

**DJ Barrister** · 05-08-2012, 01:57 AM

Not working for me, the normal DJTT EGE mapping works but this doesn't, even though the VCI is selected as output/input and I checked everything else... boo

Originally Posted by flashflooder

I'll get to your guys questions soon when I have a chance; but in the meantime, feel free to check out the first official iteration of my Flashflooder edit VCI-400SE mapping here that I just posted: http://maps.djtechtools.com/mappings/166

I listed the main changes on the MAPS page but I'll put them again here too as follows:

The upper FX sections that controlled Loop Decks C/D now control FX banks 3/4 respectively
The GRATIFY section uses the Beatmasher in FX1-1 on the top/first row, the second row is Reverb, Filt92:LFO, Delay (all on FX2) and a dedicated ECHO Freeze button (this will blink when activated)
You can keep any of the lower row Gratify FX on by pressing Shift+that button (or holding Shift as you release the Gratify button)
Pressing Shift will turn each decks FX1/2 route buttons (under the Filter knobs) into FX3/4 route buttons. The LEDs will change as you hold Shift to indicate which FX are currently routed
The LOOP tab on each deck controls the SLICER single effect on FX3 and will turn on the effect at different STYLE values (1/3/4/5). This can create interesting beat stutter sounds with the buzz rate at 0 (or glitchy sounds with the buzz at positive rates).
The Loop Recorder now has the Dry/Wet mini fader going from 0% to 100%. Button A now sets the Loop Rec to Record and should blink to the master output when not recording (LED should stay on when recording). Button B will Play/Pause and will stay lit if the Loop Rec is playing. Buttons C and D decrease or increase the Loop Rec size. Shift+Button A/B will delete the Loop Recorder.

I hope to make a short video for this sometime soon and also to make some further changes to modes/functions I don't really use (and there are definitely some others). I just wanted to post it so you guys could try it out at this point. If anyone has any major feedback, I'll definitely consider it for future versions.