Clipping & Line Levels - Page 3
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46
  1. #21
    Dr. Bento BentoSan's Avatar
    Join Date
    Mar 2008
    Location
    Perth, Australia
    Posts
    6,383

    Default

    Quote Originally Posted by MisterMoleyMole View Post
    ahh ok .... so, what i was playing with last night was just leaving auto gain feature on for the channels in traktor as that would prevent clipping, then turning the master down in traktor so no red lights, then just making sure no red lights on djm600 channels or master.

    Voila ... no clipping ??
    I dont know my experimentation with autogain didnt go to well, i found that even some songs will clip even though they have been though autogain :\ If traktor is still having that issue then yes it could be problem - i should retest this feature now theres been a couple updates.

    Trust the meters that are on the two line levels and the master meter, and most imporantly trust your ears above anything else.
    Last edited by BentoSan; 05-22-2009 at 09:10 AM.

  2. #22
    Retired DJTT Moderator DvlsAdvct's Avatar
    Join Date
    Mar 2008
    Location
    New Jersey/NYC
    Posts
    4,854

    Default

    Quote Originally Posted by BentoSan View Post
    Trust the meters that are on the two line levels and the master meter, and most imporantly trust your ears above anything else.
    This is really what it comes down to. I've had luck with the autogain, but it can't be the only thing keeping you from clipping.
    It's the FAQ. Read it.

    My Mixes, Mashups and Rants

    Divided we stand
    United we fall

  3. #23
    DJTT Moderator bloke Karlos Santos's Avatar
    Join Date
    Oct 2008
    Location
    Next to a canal in England.
    Posts
    9,018

    Default

    Quote Originally Posted by BentoSan View Post
    I dont know my experimentation with autogain didnt go to well, i found that even some songs will clip even though they have been though autogain :\ .
    Autogain has zero effect on clipping . All it does is level the output of each deck. If you push the master you will clip. If you push the one of channel faders you eliminate the autogain anyway.
    All autogain does is set all tracks at either + or - 0.0 db . This is determined in the analysis of a track.
    In theory if 2 tracks of totally different volumes are loaded into 2 decks the and the channel faders are at the same level they will play at the same volume when Autogain is on.

  4. #24
    Dr. Bento BentoSan's Avatar
    Join Date
    Mar 2008
    Location
    Perth, Australia
    Posts
    6,383

    Default

    Hmm that makes sense, so it autogain is causeing your track to clip that would be because your other track is already probably clipping.

  5. #25
    DJTT Moderator bloke Karlos Santos's Avatar
    Join Date
    Oct 2008
    Location
    Next to a canal in England.
    Posts
    9,018

    Default

    Exactly. Thats because your master or channel faders are already to high.

    I use autogain but just to level the volumes of tracks i dont rely on it. You still need to ride the master or channel faders. I just see it as a helpful tool but i still rely on my old DJ judgement.
    If you can keep your Master volume down to a good level on Traktor you will not clip with autogain on .

  6. #26

    Default

    So are we saying that with auto gain on and the line fader all the way to the top you could be clipping?

    Forget the master for now lets just concentrate on the one single line fader.
    M I S T E R M O L E Y M O L E
    part of the digital revolution

  7. #27
    DJTT Moderator bloke Karlos Santos's Avatar
    Join Date
    Oct 2008
    Location
    Next to a canal in England.
    Posts
    9,018

    Default

    Yes. If the Master is set high. You cant clip if the Master is set low.

    Are you mixing internally (with the VCI) If your line faders are at the top then something is wrong. Your channel faders should be much lower. so you have room to mix.

    Every MP3 has a different volume level. Some tracks are quieter than others. Traktor has a db level that it considers to be the right level for all tracks, 0.0db. If a track is quieter than the 0.0 level (lets say 1.4db lower) Auto gain will raise the volume of a quiet track by 1.4 db to make it 0.0db so it will show a reading in the 'Analysed' Field of +1.4db (check the Analysed field in the browser to see how much autogain has altered the volume.)

    This is all independent of the channel faders. Its internal.

    Bring your channel faders down and push the Master a bit so you have got some room to mix with the channel faders.

  8. #28

    Default

    Forget the master i said, just think of the master as being set really low just turned up enough to let a bit of sound through. ( i know this isnt realistic but its just to get my question understood )

    The channel faders within traktor are the first part of the chain where there could be clipping occuring and if it occurs here there is no point thinking about any other part of the chain.

    So ... if i have auto gain set which levels the tracks to 0.00 db at its loudest point, and then the channel fader is at the top would i be creating a clipped signal through that channel only? Forget even any other channel just this one first channel / part of the chain

    Cheers
    Gav
    M I S T E R M O L E Y M O L E
    part of the digital revolution

  9. #29
    DJTT Moderator bloke Karlos Santos's Avatar
    Join Date
    Oct 2008
    Location
    Next to a canal in England.
    Posts
    9,018

    Default

    Lol. Ok technically going off what you said you will not clip with the channel faders at the top unless you add tons of eq and effects . They all affect volume output.
    This is why you must have the faders lower.

    BUT you keep saying forget the Master but your not actually forgetting the Master yourself. You wont clip doing what you said 'because' the master is low.

    I dont understand why you want the faders at the top ?

    I see where your coming from but this 'chain' you mention doesnt really work in such a linear way. To prevent clipping you have to take all things into consideration together, EQ/Faders/Master/FX.

  10. #30
    Retired DJTT Moderator DvlsAdvct's Avatar
    Join Date
    Mar 2008
    Location
    New Jersey/NYC
    Posts
    4,854

    Default

    Keep in mind, technically, the order everything goes is

    Track Gain (the level the track is recorded at) --> Gain --> EQ --> Volume --> Master.

    And then it's plugged into another mixer that's going

    Levels from Master in Traktor -->Gain --> EQ --> Volume --> Master Out

    Then it's going to an amp, etc. etc. etc.

    So, really, if Traktor is boosting the levels to 0.0 db based on its analysis, you want to make sure your EQ and Gain are spot on so that it won't clip. The clipping is, in my view, most likely to happen before you hit the volume faders, or the Master Out.

    That make sense?
    It's the FAQ. Read it.

    My Mixes, Mashups and Rants

    Divided we stand
    United we fall

Page 3 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •