Hello, all. I know a lot of people here don't use the RMX, but for those of you that do and are too lazy to remap it for 4 decks yourself, here is what I use:
Cue, Play/Pause, Jog Wheels, volume and pitch faders, etc. all control their respective functions in traktor with deck a on the left and b on the right. If you press the Stop button on the right, the right side controlls deck D, and the same on the left with deck C. The play/pause, cue, volume and pitch faders, EQs, EQ kills, sync, beat lock, pitch reset, filter knobs (mapped to the gain knobs), and filter on/off buttons (mapped to source 1/2 buttons) and loop buttons (buttons 1, 2 and 3) as well as the Load Deck buttons are affected by this.
Switching a side of the controller to one of the secondary decks also switches to 4d view (if neither side is controlling a secondary deck, 2d mode is used) This was done because I have a /really/ small screen (I use a netbook) You'll probably want to disable this feature.
The |< >| buttons for each deck turn on the chained FX (in FX slot 1) and advanced FX (in slot 2) repectively, and are also swapped between Decks A/C and B/D. Pressing the Scratch button in the middle will let you control the effect paramaters in both slots with the EQ knobs (top is left, bottom is right), and buttons 4, 5, 6 on the left turn the separate chained effects (again, in slot 1) on and off. The right 4, 5, 6 buttons are used for the advanced FX (slot 2). 5 turns the effect on and off, while 4 and 6 scroll between the different effects.
The monitor mix knob does what it is labled as.
The arrow keys in the middle are used for a few different things. The up/down arrows turn snap and quatize mode (respectively) on and off. Right toggles full screen browse mode and acts as a modifier to let you scroll through your collection with both jog wheels.
The midi outputs aren't perfect yet, as the stop buttons don't light up, so the sync buttons on each deck light up when that side of the controller is controlling either deck c or d.
Oh, and the crossfader cross fades. Duh.
http://www.project-segfault.net/traktor/rmx_4_decks.tsi
Edit: Oh, and of course, any feedback is awesome, whether you try it out or just read my giant wall of text.
Bookmarks