Setting up TSP with a Korg Zero 4 ???

[MyUsername]

Hi, it's me again with my massive learning curve mixer.

2 weeks ago I bought TSP 2 (the scratch upgrade kit for scratch certified mixers, I use the soundcard of my mixer, not a NI soundcard) and multiple times I tried to set it up but I never can get it "fully setup".

I can manipulate the tracks in traktor with the vinyl, and flipping it loads the next track. And I can hear the tracks on my speakers wich are plugged into the mixer.

BUT I can't mix. Volume faders do nothing (with them all down I can still hear the tracks) EQ's do nothing,...
You get the picture.

Skype or screenshots would be a massive help. Thanks in advance.

[photojojo]

Give us some screen shots of your routings

[Percy]

To set the channels up on the mixer you need to run a small piece of free software called Traktor Adapt. This sets the mixeer up if i remember correct. Just google it. Great mixer but the first set up for T.S.P is a pain from what i remember.

[Percy]

Here is a link for Traktor adpt in case you don't already have it. http://traktor-adapt-for-zero-4.mac.informer.com/

[BuRdTuRd]

You have to hit the A or B above the line faders on the mixer. Only thing I can think of.

[Ross]

Make sure you're in external mixing mode.

[MyUsername]

Give us some screen shots of your routings

You have to hit the A or B above the line faders on the mixer. Only thing I can think of.

Nope.

Make sure you're in external mixing mode.

I am.

Here is a link for Traktor adpt in case you don't already have it. http://traktor-adapt-for-zero-4.mac.informer.com/

I have it. Used it. Nope.

[MyUsername]

^Woops, one of the pics is supposed to be this one:

[Ross]

You need to make sure that your outputs correspond with your inputs...

[MyUsername]

You need to make sure that your outputs correspond with your inputs...

I'm sorry but what ?

The timecode signal from the vinyl reaches the software, I can play tracks, scratch etc.

- So the inpust are good probably.

The outputs I've selected are the only ones that get the sound to the speakers.

- So it seems that these outputs are my only option


The problem is that the signal seems to bypass the mixing section and the line faders and everything else on the mixer has no effect on the audio. Very, very strange.