Usefulness of effects
Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Tech Guru Lambox's Avatar
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    1,245

    Default Usefulness of effects

    I'm come to the realization that when it comes to the use of effects (I'm using VDJ), not only does the old adage "less is more" make sense, but my own, new, adage "none is more" seems to apply.

    Lol.

    But really. It seems like all but the most subtle effects are far too obvious and cheesy. So really my question is this: in what situations are effects not only useful, but practical? I'm still pretty green to the whole concept of DJing, so maybe I'm just missing the point.

    Any ideas?
    LamboxMusic.com
    Newest release: A Pimp's Overture in B-Flat Minor
    Check out my free "Robo Rhythm" EP: Here

    Soundcloud - Facebook - Twitter

  2. #2
    Tech Guru
    Join Date
    Feb 2009
    Location
    Zurich
    Posts
    855

    Default

    It really depends on how much of a "performance" the audience expects. In my case they expect to hear the originals, so effects will only really be used for transitions.
    Traktor Pro 2.5.0, Mixxx 1.9.1, Massive, Ableton Live 8
    MBP 15" 8GB RAM OS 10.7.4, Audio Kontrol 1, Audio 2 DJ, Sennheiser HD-25 II
    DJTT VCI-100SE Arcade, Akai LDP8, M-Audio Pro Keystation 88, Novation Launchpad, iTM DJ
    ifnotwhynot.me | soundcloud.com | fairtilizer.com | digitaldj planet | digitaldj music

  3. #3
    Tech Mentor pepehouse's Avatar
    Join Date
    May 2009
    Location
    Sunny (S)pain
    Posts
    194

    Default

    I feel you, I don't use effects for the same reason, I just don't like them, I suppose you have to be very skilled to use them well and is not my case, it also depends on the music you play I play mainly house which is not suitable for effects because is very musical, I think more electronic genres like techno or minimal - techouse can benefit of them but you have to learn by practice how and when to use those.

  4. #4
    Tech Guru Str8upDrew's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati, OH
    Posts
    1,158

    Default

    I like to use a filter during almost every transition. Even though i use it more like a eq, using it to isolate the parts of the song that i want to stand out during the mix. I find filtering has more control than traditional eq's. Especially to drop out the lows, while maintaining a quality sounding mid.

  5. #5
    Retired DJTT Moderator DvlsAdvct's Avatar
    Join Date
    Mar 2008
    Location
    New Jersey/NYC
    Posts
    4,854

    Default

    See, I use some effects just to do something interesting. Filters, Phasers, Flangers all can add some intensity to breakdowns and build ups, as well as phasing in intro's or phasing outro's out.

    And the beatmasher is still my best friend for chopping stuff up.
    It's the FAQ. Read it.

    My Mixes, Mashups and Rants

    Divided we stand
    United we fall

  6. #6
    Tech Guru Fatlimey's Avatar
    Join Date
    Mar 2008
    Location
    Redmond, WA
    Posts
    1,169

    Default

    I was using a Beatmasher, Filter 92 LFO and an Echo to cut out a small piece of a Housey piano track, filter it in and out then echo the result with lots of feedback to produce an entirely new Techno track in the process. Just add a beat or an acid line underneath and voila.

    I like taking loops and mashing them beyond recognition and using that as the start of a new transition into harder stuff. Best part is, with the beatmasher at 0, once you've captured your sample you get your second deck back to add a third layer.

  7. #7
    Tech Mentor
    Join Date
    Apr 2008
    Location
    Edmonton, AB
    Posts
    395

    Default

    In general, when I use FX I use them as if I were producing a track. That means to be TASTEFUL. It's hella fun to mash on a fader to ring in your FX, but you can't dance to it like that. Often times during a transition I'll mimic the sound of the incoming track by throwing an FX on the current track, which is another good trick.

    Another piece of advice would be to use foresight. Plan your FX out in advance the same way you plan your sets out in advance (i.e. ideally you should know the next 2-4 songs you're going to play, so why not think about how you'll use FX during the transition?).

  8. #8
    Tech Mentor Mr.Nicklebe's Avatar
    Join Date
    Mar 2009
    Location
    Brighton - UK
    Posts
    150

    Default

    Quote Originally Posted by Fatlimey View Post
    I was using a Beatmasher, Filter 92 LFO and an Echo to cut out a small piece of a Housey piano track, filter it in and out then echo the result with lots of feedback to produce an entirely new Techno track in the process. Just add a beat or an acid line underneath and voila.

    I like taking loops and mashing them beyond recognition and using that as the start of a new transition into harder stuff. Best part is, with the beatmasher at 0, once you've captured your sample you get your second deck back to add a third layer.
    This is exactly what I like doing! And it's even easier with ean goldens new vci 100 maping.

  9. #9

    Default

    I really like the delay, beatmasher and gater effects.

    I use delay for adding a bit of depth. For example, a build up can be that much more powerful with a bit of delay helping to drive it.

    The beatmasher is used like a 4 bar sampler. Pretty handy to have at the ready.

    The gater I use often in conjunction with the delay. Especially useful when transitioning, I can add a bit of delay to get a cool bit of added beats (generally after I've started the mix and I've brought the volume down). Then as the other track continues to build, I can use the gater to subtrack out a bit of the old track to allow the new track to shine in the right places.

    I've also used some stuff like delay/mulholland/gater at the end of a set to create a crazy noisy finish, especially if ending a set with some trailing vocals.

  10. #10
    DJTT Super Moderator midifidler's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    1,902

    Default

    I dint use effects that much, but I have found when you really have a party rocking people go nuts for effects, and apparently the more blatant the more they like it (excluding flanger from this - flanger is stupidly over used).

    If the booth is positioned so the crowd can see what you are doing they are seeing a direct correlation between your actions and a change in the sound, which most people (other than DJ's and trainspotters) never really have the experiance of.

    Ive even had people in the crowd air tweaking lol

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •