The Ultimate FX Thread

[thestartingline1987]

Welcome back buddy Do you still happen to map some controllers?

I've been updating your original posts ever since I got my Moderator privileges.

messaged you on FB about purchasing some mapping!

[RMV]

Hi whats up Stewe, I wonder if is possible to have/use the Ean's twister gratification fxs settings on an alternative controller? tks man

[Stewe]

Hi whats up Stewe, I wonder if is possible to have/use the Ean's twister gratification fxs settings on an alternative controller? tks man

Hi, as long as you're mapping encoder-relative message it should work normally.

[aduncleas]

Hey Stewe,

I am a big fan of Joris Voorn, and i was wondering what effects did he use.

It seem he uses 2 main effects. One of them seems like a Tape Delay set in to Single effect mode linked to a regular tape delay. The other effect he uses mostly when making transitions (the second botton from right to left on top of the faders). The first botton on top of the faders doesnt seem to make anything, but he always uses. Can u help me out identify which effects are?

U can see him using all of them @ 38:18 and 11:53

Thanks in advance!

[Stewe]

Hey Stewe,

I am a big fan of Joris Voorn, and i was wondering what effects did he use.

It seem he uses 2 main effects. One of them seems like a Tape Delay set in to Single effect mode linked to a regular tape delay. The other effect he uses mostly when making transitions (the second botton from right to left on top of the faders). The first botton on top of the faders doesnt seem to make anything, but he always uses. Can u help me out identify which effects are?

U can see him using all of them @ 38:18 and 11:53

Thanks in advance!

My guess is that he uses one Tape Delay and two Reverbs. Last button seems not doing much when it's activated but leaves nice Reverb tail when deactivated.

[hitta]

4 Button Ramp Delay



This button combo is variation to rattle snake effect that Dubfire often uses in sets. It's pretty cool for making transitions between tracks or for spicing up tracks on the fly.

Make sure to set FX Unit in to single effect mode

Button 1:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.500

Button 2:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.650

Button 3:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.800

Button 4:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.950

Instant Grat Values

Button 1: Reverb, fx1, unit2

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-direct / value-0.300
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Reverb
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 2: T3Delay, fx3, unit3

Add in > FX Unit > DryWet / type-button / mode-direct / value-0.600 (returns d/w back to 0.150 on release)
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.600
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-T3Delay
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 3: Filter 92: LFO, fx2, unit3

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.300
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-F92-0
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Echo Freeze

Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Delay
Add in > FX Unit > Unit On / type-button / mode-toggle
Add in > FX Unit > Button 2 / type-button / mode-toggle
Add in > FX Unit > Button 3 / type-button / mode-direct / value-0
Add in > FX Unit > DryWet / type-button / mode-direct / value-0.300
Add in > FX Unit > Knob 1 / type-button / mode-direct / value-0.600
Add in > FX Unit > Knob 2 / type-button / mode-direct / value-0.400
Add in > FX Unit > Knob 3 / type-button / mode-direct / value-0.300
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Single
Add in > FX Unit > FX Store preset / type-button / mode-Trigger

4 Button Maher Combo

Button 1:

Add in > Modifier 1 > type-button / mode-hold > value=1
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type button / mode-direct / value=0.600
Add in > FX Unit > Knob 2 > type button / mode-direct / value=1.000
Add in > FX Unit > Button 1 > type button / mode-hold
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 2:

Add in > Modifier 1 > modCon - M1=1 / type-button / mode-hold > value=2
Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=0.800
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Effect Selector > type-button / mode-direct / value=Beatmasher
Add in > FX Unit > FX Unit Mode > type-button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type-button / mode-trigger

Button 3:

Add in > Modifier 1 > modCon - M1=2 / type-button / mode-hold > value=3
Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=0.900
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Transpose Stratch
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 4:

Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 2 > type-button / mode-dec > button options / auto repeat / resolution-Coarse
Add in > FX Unit > Knob 3 > type-button / mode-direct / value=0.740
Add in > FX Unit > Knob 3 > type-button / mode-dec > button options / auto repeat / resolution-Default
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Button 2 > modCon - M1=3 / type-button / mode-hold
Add in > FX Unit > Button 2 > type-button / mode-direct (inverted) / value=0
Add in > FX Unit > Button 3 > modCon - M1=3 / type-button / mode-hold
Add in > FX Unit > Button 2 > type-button / mode-direct (inverted) / value=0
Add in > FX Unit > Effect 1 Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > Effect 3 Selector > type button / mode-direct / value=Filter
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 1: Gater, fx1, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-ditect / value-0.500
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 2: Gater, fx1, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-ditect / value-0.700
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 3: F-0, fx2, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 2 / type-button / mode-ditect / value-0.400
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 2 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 4: LOFI, fx3, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.3.00
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger[/QUOTE]

---------

Hi Stewe,

I absolutely love the 4 button ramp delay and I'd like to use it during my sets. However, I've been trying to get the 4 button Ramp delay working for a week or 2 now, but I just can't come close to the effect in the video. I've got a couple of questions and I was wondering if you could help me out.

1. 1. This post is quite old. Is the mapping different for Traktor 2.11.3? I'm using a Xone K2 btw.
2. 2. In the video, what did you map to the knob on the Behringer controller? Speed? Dry/Wet?
3. 3. Below the mappings of the 4 knobs you provide ' Instant Gratificaction Values'. Are these part of the 4 button Ramp delay? Or is this a different effects? Not sure if this was related.
4. 4. In what sense does it matter which track you are playing on the effect itself. Do I need a hihat or snare to achieve this result?

Thanks so much in advance.

Cheers,
Dave

[Stewe]

(1) The mapping parameters are still relevant.

(2) It is mapped to LP/HP Filter (channel filter)

(3) Use only this parameter values:

Button 1:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.500

Button 2:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.650

Button 3:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.800

Button 4:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.950

(4) Yup works best with hats and snares.

[hitta]

....

Thanks! Tried it again and sounds a lot better. The volume of the effect does sounds quite low compared to the volume of the track though. I've been playing with the dry-wet, but doesn't change a lot.

I'll play around some more and see what I'll can do about it.

[Stewe]

Thanks! Tried it again and sounds a lot better. The volume of the effect does sounds quite low compared to the volume of the track though. I've been playing with the dry-wet, but doesn't change a lot.

I'll play around some more and see what I'll can do about it.

Try switching up the mapping to Tape Delay effect. It produces more feedback with similar effect.

[hitta]

Try switching up the mapping to Tape Delay effect. It produces more feedback with similar effect.

Yes, tried that with the mappings you shared earlier in this thread. Works great! Love the tape delay, thanks for sharing that. Especially with a separate button mapped for feedback so you can modulate the duration of the effect .

The tape delay does have quite of a heavy attack when hitting the button. Is there a way to balance this more with the volume of the track? Tried adjusting it with several filters, dry/wet, but not fully how I like it.. Any suggestions?