The Ultimate FX Thread

[bobg]

4:50 minutes of this video click the red button, I need that button in command.

I have mapped the x1 need the red button command xxDD

video http://www.djtechtools.com/2011/02/0...treet-fighter/

[jthightower45]

"OH SHIT" Button - Use it if you have a track running out so you can mix out.

You can do the same thing by mapping Loop Set & Loop Size Selector commands. But this mapping gives you a beatmasher effect when you move Knob 3 to chop up the loop vs. the glitch sound you get when you move loop size around.

Add In > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-single
Add In > FX Unit > Effect Selector / type-button / mode-direct / value-Beatslicer
Add In > FX Unit > Dry/Wet / type-button / mode-direct / value-1.000
Add In > FX Unit > Unit On / type-button / mode-Toggle (or hold)
Add In > FX Unit > Button 3 / type-button / mode-Toggle (or hold)
Add In > FX Unit > Knob 3 / type-fader/knob / mode-direct
Add In > FX Unit > Knob 1 / type-button / mode-direct / value-0.000
Add In > FX Unit > Knob 2 / type-button / mode-direct / value-0.000

Make same FX unit assignment for all commands.

[jthightower45]

To force your fader/knob to set ^this^ values on start the modifier needs to be set in order to jump to value 1 when fader is in down position and to automatically switch value back to 0 once the fader is moved and to all the way up - return fader back to down position and BOOM the modifier value is back to 1. To set modifier behavior in the way I've described follow this steps:

Add in > Modifier #1 > check INVERT > set type-button > set interaction-hold > set value-1
Add in > Modifier #1 > set type-button > set interaction-direct > set value-0

I'm still trying to understand the concept. But here's what I mapped for the modifier behavior you described (I think). Below in BOLD are the changes I made. Not sure if this is controller specific?

Add in > Modifier #1 > check INVERT > set type-FADER/KNOB > set interaction-DIRECT
Add in > Modifier #1 > set type-button > set interaction-HOLD > set value-0

Definitely interested in hearing more about the super knob trick you are describing. Also, still working on 2.6 MacroFX like we had discussed w/ this type of mod. Thx man.

[Stewe]

4:50 minutes of this video click the red button, I need that button in command. I have mapped the x1 need the red button command xxDD video http://www.djtechtools.com/2011/02/0...treet-fighter/

You will need one modifier to replicate this. Map M1=1 (direct) for all the effect buttons and M1=0 (direct) for bank button (red). Now just add M1=1 for all FX on commands.

[Stewe]

Add in > Modifier #1 > check INVERT > set type-FADER/KNOB > set interaction-DIRECT Add in > Modifier #1 > set type-button > set interaction-HOLD > set value-0

"FADER/KNOB" part is incorrect... Make sure to follow settings from original post.

[bobg]

I'll smoke some green. Stewe thank you very much.

I'll try tonight

[jthightower45]

"FADER/KNOB" part is incorrect... Make sure to follow settings from original post.

Type-button > set interaction-HOLD doesn't produce the invent check box. The only way I could make it work is w/ Fader/Knob. You can see in vid below.

[Stewe]

Type-button > set interaction-HOLD doesn't produce the invent check box.

You should check 'invert' before setting interaction to hold. Set fader type > click invert > change type into button.

[bobg]

my English is very bad

Could you send me an example

e.g.




add in/modifier/buton/direc/m1=1 this boton red

addin/modifier/buton/direc/m1=0 boton fx

add inn /modifier/buton/direc/m1=1 boton fx


???¿¿¿???

[Stewe]

@bobg kali man
Modifier / button-direct / value=1 (red button)
Modifier / button-direct / value=0 (effect on button)
FX on / M1=0 / button-hold
FX on / M1=1 / button-direct / value=0 (directly disengages effect)

And here's a video in action:

http://www.youtube.com/watch?v=3zsd-ChS4uA&feature=youtu.be