Audio 6 with behringer nox606 mixer

[xlf3n]

Hello All

Firstly Sorry , As it is nox303 and not nox606.
I recently got audio 6 and behringer nox303 mixer

I am trying to connect both but with no success.

Here is what i am doing

1) connecting audio 6 to laptop with usb cable and have only "line" checked in audio 6 setup

2) connecting output 1 from audio 6 to input A of mixer with RCA and output 2 from Audio 6 to input B of mixer.(Line)

3) going to traktor mixing mode and selecting external.



i have connected the output of mixer to the speaker and also hooked a headphone to the mixer.

The Audio 6 doesnt have any lights on other than the USB.


I am stuck people. Please tell me what exactly am i doing wrong here ? .

After running the setup wizzard i get the window saying

Audio 6
External mixer
and the external mixing window opens. where i have to choose Deck A to go to mixer A and Deck B to go to Mixer B



I am frustrated. Any help will be greatly appreciated.

Cheers!!

[xlf3n]

Also do i need to connect the mixer via usb cable to the laptop ?

[MrPopinjay]

Audio6 Out A (3 + 4) -> Mixer Line Input 1
Audio6 Out B (5 + 6) -> Mixer Line Input 2
Audio6 Out MAIN (1 + 2) -> Mixer Line Input 3

Ensure all the switches above the EQs on the mixer are set to LINE

In the traktor audio settings:
EXTERNAL mixing

Deck A = 3 + 4
Deck B = 5 + 6
Deck C = 1 + 2
Deck D = 1 + 2 (deck C and D will both be on channel 3. Probably best to make one or both remix decks)

Does that work? When you load tracks into the decks and play them do the green OUT lights on the Audio6 light up?

Faders up? Cross fader in the middle? Crossfader assignment switches below EQs set to OFF? EQs left at 12oclock? Master + booth volume knobs turned up?

edit: No, you do not need to connect the mixer via USB.

[xlf3n]

Audio6 Out A (3 + 4) -> Mixer Line Input 1
Audio6 Out B (5 + 6) -> Mixer Line Input 2
Audio6 Out MAIN (1 + 2) -> Mixer Line Input 3

Ensure all the switches above the EQs on the mixer are set to LINE

In the traktor audio settings:
EXTERNAL mixing

Deck A = 3 + 4
Deck B = 5 + 6
Deck C = 1 + 2
Deck D = 1 + 2 (deck C and D will both be on channel 3. Probably best to make one or both remix decks)

Does that work? When you load tracks into the decks and play them do the green OUT lights on the Audio6 light up?

Faders up? Cross fader in the middle? Crossfader assignment switches below EQs set to OFF? EQs left at 12oclock? Master + booth volume knobs turned up?

edit: No, you do not need to connect the mixer via USB.

ty a ton mate

Although, I figured out the setup late last night.

Its nearly the same as you said , just that I am not doing

Audio 6 Main out to Mixer Line Input 3

Is that required ? the sound is playing even without that .. I am taking the output of the Mixer to the speaker .

What exactly happens when i do Audio 6 out to mixer line input 3 ?

[MrPopinjay]

It's not required. If you have another pair plugged into the third input it means you can mix 3 decks

[xlf3n]

alright mate .. i knew that . was still wondering i am missing something. All clear now !