(New Update!) DJTT Kontrol S4 v2.0 Official Mapping Thread
Page 1 of 9 12345 ... LastLast
Results 1 to 10 of 88
  1. #1
    DJTT Mapping Psycho
    Join Date
    Feb 2012
    Location
    Netherlands, Tilburg
    Posts
    222

    Cool (Update!) DJTT Kontrol S4 v2.0 Official Mapping Thread

    Last update: November 3 , 2014

    Download S4 Mk1 version here: https://maps.djtechtools.com/mappings/2
    Download S4 Mk2 version here: https://maps.djtechtools.com/mappings/2211


    Kontrol S4 Mk1 overview:

    11288386134_76f89e3042_z.jpg
    Official DJTT Kontrol S4 Mapping v2 Update
    The current release version is v2.0.7
    This mapping is designed and maintained by DJTT Beaubryte.

    This release reflects the Traktor 2.7.0 update with many added features and major improvements.
    It’s a straightforward but fully loaded mapping suitable for performing.
    It comes with lots of changeable mods, which you can edit in the controller manager.
    It's impossible to cover all features here,
    Read the manual or have a look at our quick guide for more info.

    Highlights:
    Time Code Support - Beat Tap * - JogFX * - Echo Mods * - Browser Mod - * Headphone Mod
    *- Preview Player- Key Adjust * - 4 FX units * - * Auto Switch Decks - Quick load next track
    -* FX presets - * Filter On Buttons -* Panic Button *-8 HotCues * - SuperFX Mode - *
    Customizable Mods – AutoFX * - Macro FX *- Layout Selector - FX Off after loading - *
    Adjust Tempo 0.01 BPM - * Any Shift On Mixer *- Remix Deck Hybrid Mode - * Freeze Mode


    What's New in v2.0.7?
    >Added Freeze Mode

    Earlier:
    +Partly fixed the Loop Display for Deck A and B
    +Added Time Code support
    +Various new features on the master button
    +Offset Button Down = Flux Mode
    +Offset Button Up = Reset Tempo
    +Minor bug fixes


    SuperFX Mode.
    Grouped JogFx, Single JogFX and AutoFX are only available in SuperFX Mode.
    SuperFX mode is activated by Shift+Tempo Offset Button.

    Press Shift+Tempo Offset button to activate SuperFX Mode.
    While SuperFX is activated, the Offset, Load, Samples and Shift LED will flash.
    When you see these LEDs flashing, press the Jog and turn it.
    Hold the FX buttons on the FX units for programmed automated effects.

    When SuperFX is active:


    • Shift + Tempo Offset + Deck Display + Samples + Load LEDs Flash.
    • Shift + Turn JogWheel changes the 3 grouped JogFX presets
    • Sample Buttons change the 4 single JogFX presets
    • Automatic Effects while holding the FX Unit buttons 1*4

    Press a Tempo Offset or the FX mode button to deactivate Super FX mode.

    Deck A+B Track Decks with Hybrid Remix Deck C+D controls:
    To start Hybrid Mode, activate deck A or B on the Mixer section,
    then hold The FX MODE Button to temporarily hold Hybrid mode.
    OR press Shift + Deck Assign C/D to lock hybrid mode.
    To exit Hybrid mode, press the FX Mode button, or Shift+assign C/D, or activate JogFX.

    • The Sample buttons have Hot Cue 5-*8 by default,
      In Hybrid mode they control Remix Deck slot 1*-4
    • The FX Units have effect controls by default,
      in Hybrid mode they control remix deck's mutes and volumes.


    Echo Mods

    • Mod 1: Shift + Press Left Loop Active Knob to activate an Echo Out
    • Delay in FX Unit 4. Press Shift+Loop Active again to disable the Echo Mod.
    • Mod 2: Shift + Press Right Loop Set Knob to activate a Ramp Delay in FX Unit 4.
      Press shift+center Loop Set Knob again to disable the Echo Mod.

    While an Echo Mod is active, Hold Shift + Turn the Loop Knobs to control the echo settings.


    Loop Knobs & Buttons
    Turn Left Knob: Beatjump /Move Loop
    Push Left Knob: Loop Active
    Turn Right Knob: Set Loop Size
    Push Right Knob: Loop Set
    Shift + Press Left Knob = Activate Echo Mod 1
    Shift + Press Right Knob = Activate Echo Mod 2
    Buttons: Set Loop In/out, Flashing while using Echo Mod 1/2.
    Shift + Turn Left Loop Knob Deck A = Fine Adjust Tempo A by 0.01 BPM
    Shift + Turn Right Loop Knob Deck A = Adjust Tempo Fader Range A
    Shift + Turn Left Loop Knob Deck B = Adjust Tempo Fader Range B
    Shift + Turn Right Loop Knob Deck B = Fine Adjust Tempo B by 0.01 BPM

    Freeze Mode
    Shift + Loop IN = Toggle Freeze Mode On/OFF
    Shift + Loop Out = Disable Freeze Mode, Escape
    While Freeze Mode is active:
    Loop In: Reset the 1st Slice
    Turn Loop Size Knob = Adjust Slice Size
    Shift + Turn Loop Size Knob = Adjust Slice Count
    Loop Set = Loop Freeze Mode

    Panic Button
    Need a rescue during performing?
    Hold the big Browse/Preview button, Press Loop UNDO. This button clears all effects assignments, kills all states, stops the loop recorder, preview player and restores Traktor.

    Hold Master Button:
    + FX Button 1/2 = Crossfader left/right assignments
    + Turn Browse Knob = Change Screen Layout
    + Turn Gain Knob = Change Platter and Scope View (Traktor Scratch only)
    + Push Gain Knob = Change Deck mode (Track/Line-in/Remix Deck)

    Timecode Support (Traktor Scratch only)
    > Shift + Headphone Cues = Set to Relative Mode
    > Hold Master+ Headphone Cues = Enable Scratch + Calibrate
    > Hold Master + Turn Gain = Change Platter and Scope View
    > Hold Master + Push Gain = Switch Phono/Remix Decks
    > Play button = Set to internal mode
    > Tempo Offset UP = Reset Tempo

    Flux Mode On/Off
    Easy way: Tempo Offset Down Button
    Or on the fly:
    Deck A: Hold Right Shift and HotCue 1*-4 on deck A
    Deck B: Hold Left Shift and HotCue 1*-4 on deck B


    Read the included manual for more info.
    Attached Images Attached Images
    Last edited by beaubryte; 11-03-2014 at 03:22 PM. Reason: Version 2.0.7 Release

  2. #2
    DJTT Mapping Psycho
    Join Date
    Feb 2012
    Location
    Netherlands, Tilburg
    Posts
    222

    Default

    Download S4 Mk2 version here: https://maps.djtechtools.com/mappings/2211

    Kontrol S4 Mk2 overview:

    11288436183_e58b6d6e9e_z.jpg
    The Mk2 mapping is exactly the same, however, some buttons are renamed on the Mk2 device, making it a little different from the MK1, for example the Flux and Preview buttons.

    Highlights:
    Time Code Support - Beat Tap * - JogFX * - Echo Mods * - Browser Mod - * Headphone Mod *- Preview Player-
    Key Adjust * - 4 FX units * - * Auto Switch Decks - Quick load next track -* FX presets - * Filter On Buttons
    -* Panic Button *- 8 HotCues * - SuperFX Mode- * Customizable Mods – AutoFX * - Macro FX *- Layout Selector - FX Off after loading - * Adjust Tempo by 0.01 BPM - * Any Shift On Mixer *- Remix Deck Hybrid Mode - Freeze Mode


    Hold Master Button
    + FX Button 1/2 = Crossfader left/right assignments
    + Turn Browse Knob = Change Screen Layout
    + Turn Gain Knob = Change Platter and Scope View (Traktor Scratch only)
    + Push Gain Knob = Change Deck mode (Track/Line-in/Remix Deck)

    Time Code Support (Traktor Scratch only)
    > Shift + Headphone Cues = Set to Relative Mode
    > Hold Master+ Headphone Cues = Enable Scratch + Calibrate
    > Hold Master + Turn Gain = Change Platter and Scope View
    > Hold Master + Push Gain = Switch Track/Line/Remix Decks
    > Play button = Set to internal mode
    > Tempo Offset UP = Reset Tempo



    Looping
    Left Knob: BeatJump /Move Loop/ Loop Active
    Right Knob: Set Loop Size / Loop Set
    Shift + Press Left Knob = Activate Echo Mod 1
    Shift + Press Right Knob = Activate Echo Mod 2
    Shift + Turn Left Knob (left deck) = Fine Adjust Tempo by 0.01 BPM
    Shift + Turn Right Knob (left deck = Adjust Tempo Fader Range
    Shift + Turn Left Knob (right deck) = Adjust Tempo Fader Range
    Shift + Turn Right Knob (right deck =Fine Adjust Tempo by 0.01 BPM
    Buttons: Set Loop In/out, Flashing while using Echo Mod 1/2.

    Freeze Mode
    Shift + Loop IN = Toggle Freeze Mode On/OFF
    Shift + Loop Out = Disable Freeze Mode, Escape
    While Freeze Mode is active:
    Loop In: Reset the 1st Slice
    Turn Loop Size Knob = Adjust Slice Size
    Shift + Turn Loop Size Knob = Adjust Slice Count
    Loop Set = Loop Freeze Mode


    Super FX Mode
    -Use the Jogwheel for controlling effects, Get access to instant FX.
    -Press Shift+Flux button to activate Super FX.
    -Press the Flux button to de-activate (this can be done without shift)


    While Super FX is activated, the Range, Load, Samples and Shift leds will blink.
    When you see these leds blinking, press the Jog and turn it!
    Use the FX buttons on the FX Units for Macro effects!


    JogFX (Grouped, FX3) + AutoFX (FX1)
    There are 3 preset FX combinations with this mod.
    >Hold Shift and turn the jogwheel to skip to the next preset.
    >The FX leds 1+2+3 will indicate which preset you're using.
    >Press Flux to Disable JogFX.

    JogFX (Single, FX 4)
    While JogFX is active, you can use the 4 sample buttons
    to trigger 4 more instant JogWheel effects.

    While Super FX is active
    * Shift + Range + Deck Display + Samples + Load Leds Flash.
    * Shift + Turn JogWheel change the 3 grouped JogFX presets
    * Remix Buttons for the 4 single JogFX presets
    * Automatic Effects on the FX Unit buttons
    * Press a Flux or the FX mode button to deactivate Super FX mode.

    Echo Mods
    These Echo Mods work independent from Super FX Mode.

    *Mod 1:
    >Shift+Press Left Loop Active Knob to activate an Echo Out
    delay in FX Unit 4.
    >When activated the loop in+dry/wet and shift leds will flash
    >Press Shift+Loop Active again to disable the echo mod.

    *Mod 2:
    >Shift+Press Right Loop Set Knob to activate a Ramp Delay in FX Unit 4.
    >When activated the loop out+dry/wet and shift leds will flash
    >Press shift+center Loop Set Knob again to disable the echo mod.

    While the Echo mod is active:
    * Shift + Loop In or Out buttons flash.
    * Hold Shift > The loop knobs can be used to control some more FX settings
    * Don't forget to turn it off, press Shift+Loop Active or Shift+Loop Set



    Deck A+B Track Decks with hybrid Remix Deck controls:
    >The Remix buttons have Hot Cue 5-8 by default
    In Hybrid mode they control remix deck slot 1-4
    >The FX Units have effect controls by default,
    In Hybrid mode they control remix deck mute and volumes.
    >Hold The FX MODE button to temporarily hold Hybrid mode
    >Or press Shift + Deck Assign C/D to lock this mode.

    To exit this state:
    Press the FX Mode button, or Shift+assign C/D, or activate JogFX.


    There's much more! Read the included manual for all info!
    Last edited by beaubryte; 11-03-2014 at 03:20 PM. Reason: MK2 release

  3. #3

    Default

    EPIC!!!

    Bravo man. Bravo.
    Aspiring mixologist | Traktor Kontrol S2 | Midi Fighter 3D | all around cool guy

  4. #4
    Tech Guru VanGogo's Avatar
    Join Date
    Mar 2010
    Location
    L.A. (lower Alabama)
    Posts
    1,913

    Default

    Thanks for the hard work Beaubryte!

  5. #5
    Tech Mentor
    Join Date
    Apr 2012
    Posts
    111

    Default

    You just made my freaking day, I LOVE YOUR MAPPINGS! I recently got a s4 and I had been using your S2 mapping forever, and I didn't see a mapping by you for the S4 and I was bummed. Now this? OMG YOU ROCKKKKKKKKKKKKKKKKKKKKKK!

  6. #6
    Tech Mentor
    Join Date
    Sep 2009
    Posts
    222

    Default

    Thankkks for that mapping can i ask for load Start feature please?

  7. #7
    Tech Student
    Join Date
    Aug 2012
    Posts
    2

    Default

    Hey Beaubryte,

    Thank you for an awesome mapping!

    Just a quick question, I noticed when I'm playing with the remix set in decks C/D that both loop knobs, mapped to control the levels in each slot and filter, when activated it doesnt ignore the loop functions, so as I try to increase or decrease the filter, it does the same for the loop size. Is this a gliche on my side? if so, how would I would I be able to fix it?

    Again thank you for an awesome mapping!

  8. #8
    DJTT Mapping Psycho
    Join Date
    Feb 2012
    Location
    Netherlands, Tilburg
    Posts
    222

    Default

    Thanks for pointing that out, It happens only to deck C. I will fix this right away.

  9. #9
    DJTT Mapping Psycho
    Join Date
    Feb 2012
    Location
    Netherlands, Tilburg
    Posts
    222

    Default

    Quote Originally Posted by onetidd View Post
    Thankkks for that mapping can i ask for load Start feature please?
    Sure, Explain how this should work effectively please.

  10. #10
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,492

    Default

    Hey Beau,

    What's the Super FX mode?

Page 1 of 9 12345 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •