Mapping for Noobs!
Results 1 to 5 of 5
  1. #1
    Tech Wizard
    Join Date
    Dec 2010
    Posts
    47

    Default Mapping for Noobs!

    Ok, so after some feedback and guidance from other forum members, I decided to take the best mapping I could... and simplify it! It could be the Aussie thing but rather than build.. I almost demolished.

    Most of you would probably be embarassed by my first attempt but my mapping does this:
    Deck Selection
    Play/Pause/Stop
    A few effects
    8 Cue Triggers
    All in all it's basically what I want.

    I do have a few issues I would like help with:
    1. I use the bank select buttons to pick a deck in the following order: C A B D
    The actual deck selection works fine but I just cannot get the lights on the buttons to work properly. They either light and don't turn off or don't light at all. It would be great to have a quick look and know what deck I am controlling. When finalised I would like these buttons to select the deck, activate the cue through my headphones and light up... so any guidance would be appreciated.

    2. Somehow I "deleted" parts of the Freeze Delay effect... if anyone can give me some advice on re-mapping that affect it would be awesome.

    I will upload the mapping once I have tested it more and, hopefully, solved the above issues with the assistance of other forum members.

    Coops

  2. #2
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,377

    Default

    Here is for Echo-out effect:

    Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Delay
    Add in > FX Unit > Unit On / type-button / mode-toggle
    Add in > FX Unit > Button 2 / type-button / mode-toggle
    Add in > FX Unit > Button 3 / type-button / mode-direct / value-0
    Add in > FX Unit > DryWet / type-button / mode-direct / value-0.300
    Add in > FX Unit > Knob 1 / type-button / mode-direct / value-0.600
    Add in > FX Unit > Knob 2 / type-button / mode-direct / value-0.400
    Add in > FX Unit > Knob 3 / type-button / mode-direct / value-0.300
    Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Single
    Add in > FX Unit > FX Store preset / type-button / mode-Trigger

    Could you upload your TSI mate? I could give a peak and give some feedback because I'm not quite sure what could be wrong there by looking in your input on a LED issues.

  3. #3
    Tech Wizard
    Join Date
    Dec 2010
    Posts
    47

    Default

    @ Stewe - Thanks again. Uploading now. It's called Map for Noobs.
    Haven't had a chance to add that effect yet.
    Let me know what you think.
    Coops

  4. #4
    Tech Wizard
    Join Date
    Dec 2010
    Posts
    47

    Default Noobs Map

    Decided to put it here instead of uploading to maps... nowhere near ready for others and would appreciate a double check first.
    Coops
    Attached Files Attached Files

  5. #5
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,377

    Default

    Mate, first thing remove all the modifier values except for 'FX Panel Mode' from condition 1 and 2 slots. Clear all commands off modifiers and re-upload. Some of commands you have taken from IG mapping are still set to work with a modifiers but you got that modifiers deleted while editing. And I'll add echo. That goes M8 if I'm correct.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •