Launchpad White
Results 1 to 8 of 8

Thread: Launchpad White

  1. #1
    Tech Mentor DJ Descendent's Avatar
    Join Date
    Jun 2012
    Location
    Washington State
    Posts
    253

    Default Launchpad White

    Hey DJTT, I have been off the radar for a while now, so I thought I would post a new post considering I just Painted my Novation Launchpad, White. I have made only the top part of it white because of some signatures I have on the bottom. I looks pretty fresh and thought I should show you guys. I unfortunately didn't have any sandpaper so I was really ghetto and used an old skateboard of mine. Haha. Yeah so if any of you choose to paint yours, make sure you sand it properly so its a bit nicer.

    The Paint I used was "Rust-Oleum Painters Touch, Ultra Cover 2x Coverage" if you are wanting a good paint. I used it for My Numark X6 mixer and my Numark NDX-400 a year ago and there is no chipping or smugging.

    971786_456674107760326_219996586_n.jpg

  2. #2
    Tech Guru Polygon's Avatar
    Join Date
    Mar 2013
    Location
    A salt mine in Michigan
    Posts
    1,275

    Default

    Or just buy the original limited edition white :P
    Anyways, congrats on the mod, looks great!
    Quote Originally Posted by donstone View Post
    I only use VINYL flooring. Rugs are for cheaters.
    Quote Originally Posted by Patch View Post
    If you can't find an Abba song that you like, you are a liar of the highest order.

  3. #3

    Default

    Quote Originally Posted by DJ Descendent View Post
    Hey DJTT, I have been off the radar for a while now, so I thought I would post a new post considering I just Painted my Novation Launchpad, White. I have made only the top part of it white because of some signatures I have on the bottom. I looks pretty fresh and thought I should show you guys. I unfortunately didn't have any sandpaper so I was really ghetto and used an old skateboard of mine. Haha. Yeah so if any of you choose to paint yours, make sure you sand it properly so its a bit nicer.

    The Paint I used was "Rust-Oleum Painters Touch, Ultra Cover 2x Coverage" if you are wanting a good paint. I used it for My Numark X6 mixer and my Numark NDX-400 a year ago and there is no chipping or smugging.

    971786_456674107760326_219996586_n.jpg
    Did you cover each one of the buttons with tape? or is there an easier way

  4. #4
    Tech Guru Polygon's Avatar
    Join Date
    Mar 2013
    Location
    A salt mine in Michigan
    Posts
    1,275

    Default

    Quote Originally Posted by jacksoe12 View Post
    Did you cover each one of the buttons with tape? or is there an easier way
    he probably disassembled the unit and just coated the top frame
    Quote Originally Posted by donstone View Post
    I only use VINYL flooring. Rugs are for cheaters.
    Quote Originally Posted by Patch View Post
    If you can't find an Abba song that you like, you are a liar of the highest order.

  5. #5
    Tech Guru William Gibson's Avatar
    Join Date
    Dec 2012
    Location
    ChiCompton
    Posts
    533

    Default

    Looks sick. Seriously contemplating taking apart my ohm...

  6. #6
    Tech Guru
    Join Date
    Nov 2012
    Location
    FL, USA
    Posts
    2,122

    Default

    Haha. That really is ghetto. Sandpaper is so cheap!

    I actually really like the two tone paintjob.

  7. #7

    Default

    Nice, looks a lot better than the limited edition ones

  8. #8
    Tech Mentor DJ Descendent's Avatar
    Join Date
    Jun 2012
    Location
    Washington State
    Posts
    253

    Default

    Yeah its easier. You need to unscrew the back and then carefully lift the top off,and then just paint it.
    Quote Originally Posted by jacksoe12 View Post
    Did you cover each one of the buttons with tape? or is there an easier way

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •