Cmd behringer MM 1 fx unit and led please
Results 1 to 9 of 9
  1. #1
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default Cmd behringer MM 1 fx unit and led please

    Hello,
    I would attribute the fx 1.2 on the deck A in 1-2 of channel 1 (ok) ,the fx 3,4 of Deck A on 1,2 in channel 2.
    Then fx 1-2 of Deck B on channel 3 and 3-4 fx deck B on channel 4 .
    And that the LEDs operate simultaneously.
    J have each time a problem with channel 2 and 3 which Confuse.
    Here is my tsi me if you can change it please
    https://www.mediafire.com/?yfsc9o7merhg14c
    Thank you in advance
    If something is not clear let me know
    Have a nice evening
    Last edited by d6mike; 12-14-2014 at 01:41 PM.
    This is the best part of the trip

  2. #2
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default

    Hi,
    No idea for me
    This is the best part of the trip

  3. #3
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,355

    Default

    Hey dude, I have hard time to understand what you're asking for... Perhaps you could draw a diagram with all controls that you're after and I'll see what I can do about it.

  4. #4
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default

    hello Stewe,
    Thank you.
    I m understand you,it s not easy to understand me
    The problem:
    In my cmd MM 1, I m would like to have the:
    fx 1 for deck A on G0
    fx 2 for deck A on g#0
    fx 3 for deck A on B0
    Fx 4 for deck A on C1 .

    Fx 1 for deck B on D#1
    Fx 2 for deck B on E1
    Fx 3 for deck B on G1
    Fx 4 for deck B on G#1

    With for every fx: the led blue when I m open a Fx and orange when I m close (this is one of my probleme to mapping (the led))
    Thank you for my Christmas gift

    1.jpg
    This is the best part of the trip

  5. #5
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,355

    Default

    Ok - I've made you an example in a .tsi
    Correct midi range for CMD LED output is min=0 max=1 (for ON/OFF button)
    tip: use maximum value of "2" if you wish your LED to blink.

    d6mike's happy buttons.tsi

    Hope this helps
    Merry Christmas!

  6. #6
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default

    Hi,
    Thank I don t have time for instant (many work in restaurant )
    But I m juste taste your happy .tsi.
    But she doesn t work i look depth in 1 or 2 days
    And come to say what doesn t work
    Merry christmas to
    Thanks Stewe
    This is the best part of the trip

  7. #7
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,355

    Default

    Perhaps your MM-1 is set to different MIDI channel. Mine is set for Ch.12
    Just enable 'Midi Learn' button and remap the file I provided on your MM-1 (which is most likely currently on the CH.1)

    Or, use the Channel Changer Utility from Behringer site if you would rather like to tweak the base channel so your MM-1 could read my mapping.

  8. #8
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default

    hi
    Not your chi is reconnu.Il works even if I am as you say the CH. 5.
    J have try directly lear function but it changes nothing.
    The problem is on the fx 3 and 4 of deck A and the fx 3 and fx4 deck B.
    I wish when I press B0 is either fx3 the deck A and when I pressed is the fx 1 deck B illuminates.
    So like if I pressed c1 c is the fx 2 deck B comes on while I would like to be the fx 4 deck A.
    This the same for other fx 3-4 of deck A and B
    Is actually time for the same thing as if I had the basic configuration of the MM 1.
    can you try another tsi from the mine that I put in the link above please
    Sorry and thank for your good job
    Have a nice day
    This is the best part of the trip

  9. #9
    Tech Convert
    Join Date
    Nov 2014
    Posts
    12

    Default

    Hi,
    All are running now.It s a stupide double mapping of my fault
    Thank Dr Stewe
    Merry Christmas and see you soon maybe
    This is the best part of the trip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •