Cmd behringer MM 1 fx unit and led please

[d6mike]

Hello,
I would attribute the fx 1.2 on the deck A in 1-2 of channel 1 (ok) ,the fx 3,4 of Deck A on 1,2 in channel 2.
Then fx 1-2 of Deck B on channel 3 and 3-4 fx deck B on channel 4 .
And that the LEDs operate simultaneously.
J have each time a problem with channel 2 and 3 which Confuse.
Here is my tsi me if you can change it please
https://www.mediafire.com/?yfsc9o7merhg14c
Thank you in advance
If something is not clear let me know
Have a nice evening

[d6mike]

Hi,
No idea for me

[Stewe]

Hey dude, I have hard time to understand what you're asking for... Perhaps you could draw a diagram with all controls that you're after and I'll see what I can do about it.

[d6mike]

hello Stewe,
Thank you.
I m understand you,it s not easy to understand me
The problem:
In my cmd MM 1, I m would like to have the:
fx 1 for deck A on G0
fx 2 for deck A on g#0
fx 3 for deck A on B0
Fx 4 for deck A on C1 .

Fx 1 for deck B on D#1
Fx 2 for deck B on E1
Fx 3 for deck B on G1
Fx 4 for deck B on G#1

With for every fx: the led blue when I m open a Fx and orange when I m close (this is one of my probleme to mapping (the led))
Thank you for my Christmas gift

1.jpg

[Stewe]

Ok - I've made you an example in a .tsi
Correct midi range for CMD LED output is min=0 max=1 (for ON/OFF button)
tip: use maximum value of "2" if you wish your LED to blink.

d6mike's happy buttons.tsi

Hope this helps
Merry Christmas!

[d6mike]

Hi,
Thank I don t have time for instant (many work in restaurant )
But I m juste taste your happy .tsi.
But she doesn t work i look depth in 1 or 2 days
And come to say what doesn t work
Merry christmas to
Thanks Stewe

[Stewe]

Perhaps your MM-1 is set to different MIDI channel. Mine is set for Ch.12
Just enable 'Midi Learn' button and remap the file I provided on your MM-1 (which is most likely currently on the CH.1)

Or, use the Channel Changer Utility from Behringer site if you would rather like to tweak the base channel so your MM-1 could read my mapping.

[d6mike]

hi
Not your chi is reconnu.Il works even if I am as you say the CH. 5.
J have try directly lear function but it changes nothing.
The problem is on the fx 3 and 4 of deck A and the fx 3 and fx4 deck B.
I wish when I press B0 is either fx3 the deck A and when I pressed is the fx 1 deck B illuminates.
So like if I pressed c1 c is the fx 2 deck B comes on while I would like to be the fx 4 deck A.
This the same for other fx 3-4 of deck A and B
Is actually time for the same thing as if I had the basic configuration of the MM 1.
can you try another tsi from the mine that I put in the link above please
Sorry and thank for your good job
Have a nice day

[d6mike]

Hi,
All are running now.It s a stupide double mapping of my fault
Thank Dr Stewe
Merry Christmas and see you soon maybe