ok i got it
im not sure exactly why, just happy i dont to do that everyday :P
thanks~!
ok i got it
im not sure exactly why, just happy i dont to do that everyday :P
thanks~!
Error No 15024: Boot failed
and i'm using serial to serial from desk top to vci. what gives!!!
"Music is the purest form of art... therefore true poets, they who are seers, seek to express the universe in terms of music... " "Music is your own experience, your own thoughts, your wisdom. If you don't live it, it won't come out of your horn. They teach you there's a boundary line to music. But, man, there's no boundary line to art." Quotes of wisdom...
I've been trying to update the firmware on my VCI-100, and I can't seem to get the VCI into boot mode.
I've seated the firmware update module firmly into the correct slot, and removed the wire as shown, and connected two different serial cables into the onboard serial ports of two different computers, but whenever I switch the VCI on ready to flash it, all of the lights come on as normal, and when I touch the platter it turns red- so meaning that the VCI hasn't gone into the boot mode necessary to program the flash.
I emailed service at djtechtools.com on monday but haven't heard anything back yet- I'd really like to get this sorted as soon as possible!
Well for the last hour been trying to get my pc to recognise the USB device but each time i plug in the USB it fails and is followed with an error basically it's not installing the midi software, and the firmware software tool can't see the COM1, so it looks like I will have to pick up a serial to serial cable and try this instead :/
hhmmm i dont know much about window pc's but isnt COM1 only used for a serial port ? i did read on here somewhere that if you are using a USB to serial then you should use a port number of above COM3
but i could be wrong
what kinde of software i have to use to upgrade my vci 100 silver's firmware to 1.3 ??
Anybody please help.
here you got all the answers
http://www.djtechtools.com/2008/08/1...-100-firmware/
Setup: TP 3, Kontrol S5, MF Twister, MF3D, MF Classic, DIY-Midifighter, Aiaiai Tma-1
Would a monitor cable (DB9 male-to-male) with a null-modem adapter (such as the one pictured) on each end work for the firmware upgrade? Thanks in advance!
![]()
OS: Windows XP [Admin]
FDT API initialised: version 4, 02, 00, 008
Clock Fequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM1'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM1' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Attempting 4800
Attempting 2400
Attempting 1200
Error No 15024: Boot failed
I use are serial to serial cable :/ I tried it on 2 different pcs...
please help me!
|
Bookmarks