Hi All,
I wanted to setup a home studio for my DJing, so I purchased following gear:
1. Traktor X1 MkII
2. Scarlett 2i4 - Audio Interface
3. NX Audio - Carbon3 External Mixer (3 Channels)
I use traktor pro 2.7 for my DJing and my settings are as follows:
Audio Setup: selected scarlet audio interface as my sound card
Output Routing:
Deck A - Outputs 1 and 2
Deck B - Outputs 3 and 4
Below are the images of how I have connected between scarlett and the external mixer:
Scarlett back:
External Mixer back:
Front panel of scarlet:
I have set the direct monitor knob to 100% playback and set monitor volume to 100%.
Problems that I'm facing:
1. I can hear music playing on my CH2 (Outputs 1&2 of scarlett) of mixer only when I set the direct monitor knob to 100% playback and monitor knob is set to 100%. If I reduce the volume there, then the volume is lowered in my mixer's CH2.
2. The output from CH3 (Outputs 3&4 of scarlett) is always heard not matter what the setting is on the monitor knobs.
3. Output on CH3 is loud when compared to the output of CH2.
Am I missing some setting in software?
Are my connections correct?
I know scarlett 2i4 is not meant for DJing. But I need just two channels on my mixer which scarlett can easily provide and also it fits in perfectly for production setup.
I thought when I connect it the way I have did now, I would get the outputs directly to CH2 and CH3 on my external mixer and I would not have to touch scarlett to control the volume of my outputs coming from traktor software.
Bookmarks