Looking at a Pioneer DJM 700, has a slight issue - fixable?
Results 1 to 6 of 6
  1. #1

    Default Looking at a Pioneer DJM 700, has a slight issue - fixable?

    Hi all,

    I came across this mixer for sale in the local ads for really cheap - less than a hundred quid. The seller says that everything is working but there's an issue with the master out where the sound comes and goes intermittently.

    This says to me that there may be a solder joint somewhere that's knackered so it may be an easy fix for a half decent mixer.

    Could this be the issue? Has anyone else experienced this with their DJM 700, if so what did you do to fix it?

    Any help appreciated guys!


  2. #2
    Tech Guru the_bastet's Avatar
    Join Date
    May 2012
    Cincinnati, OH


    Is it just the master output? Id inquire about the booth and record outputs as well. If it's just the master output, that's a steal most likely just an easy fix (replacing the XLR connector).
    - Equipment - 2X Technics 1200, 2X Audio Technica ATLP1240, 2X XDJ700, 2X XDJ1000 MK2, Denon DNX-1100, Mixars DUO, DJM750 MK2, NI Audio 10, NI Aduio 4, Serato SL3, 4X Shure M44-7, 2X Ortofon Pro S, 2X Numark Groove Tool, Maschine MK3, Samson Carbon 49, Roland SE-02, Novation Launchcontrol, TouchOSC, Nocation Peak, Arturia MiniBrute, Korg Volca Kick, MicroKorg (Classic), NI Komplete Audio 6

  3. #3


    Booth and record out work fine, it's just the master out that has the issue.

    I'll pick it up then, nice one mate.

  4. #4


    I Picked this up and gave it a test using the MasterOut2 output and sure enough there's no sound, I've not checked with XLR's yet as I'm waiting for cables.

    Master level indicator shows signal passing through.

    I've had a quick look at the service manual for this and it shows just before the masterout2 out there's a box with an 'x' in it and MUTE above it. Can anyone tell me what this is for?

    Last edited by Sel The Don; 07-06-2020 at 09:31 AM.

  5. #5


    Move the attenuator that's next to the rca outputs from -6 position. Also try wiggling it, maybe the contact problem is there.

  6. #6


    Hello mate,

    I tried that and it didn't work, I also get no sound from the XLR outputs either.

    Looking at the service manual there's a few fuses on the output circuit so I'll open it up over the next few days and check connections/switches/fuses and trace my way back to the DAC.

    The mixer cost me 60 quid so I don't mind spending a bit more buying parts that I need.
    Last edited by Sel The Don; Yesterday at 02:07 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts