Daisy Chain Active PA system questions
Results 1 to 4 of 4
  1. #1
    Newbie
    Join Date
    Mar 2015
    Posts
    3

    Default Daisy Chain Active PA system questions

    Hi guys,

    I have 9 B52 Matrix 2000 pa systems and I want to daisy chain them together. These are active 18 subs powering 2 passive 12 speakers with tweeters. Is this possible, and is there anything I loose? The passive speaker channels are 300 watts @ 4ohms and the sub is 600 watts.

  2. #2
    Tech Guru SirReal's Avatar
    Join Date
    May 2010
    Location
    San Fran Bay Area
    Posts
    2,219

    Default

    According to the amplifier specs there's a male XLR parallel out, so you should have no problem daisy chaining multiple systems together.
    "Walking the fine line between Stupidity and Genious" My Soundcloud ---- My Mixcloud
    MBP Retina 2015--TSP 2.10--2xDNSC5000--2xDNSC2900--2xDNSC2000--NI F1--Denon DN-X1700--HDJ2000--Stanton STR8-80--QSC K12's--Crown Amplifier--Urei Monitors

  3. #3
    Newbie
    Join Date
    Mar 2015
    Posts
    3

    Default

    So you dont loose sound quality?

  4. #4
    Tech Guru SirReal's Avatar
    Join Date
    May 2010
    Location
    San Fran Bay Area
    Posts
    2,219

    Default

    nope, it should be line level out of the parallel jack, matching whatever signal is sent to the input. I guess, conceivably, you could lose sound quality if you had an extremely long run to the next amp but your dance floor would have to be the size of a stadium. As long as you're using balanced XLRs you should be fine.
    "Walking the fine line between Stupidity and Genious" My Soundcloud ---- My Mixcloud
    MBP Retina 2015--TSP 2.10--2xDNSC5000--2xDNSC2900--2xDNSC2000--NI F1--Denon DN-X1700--HDJ2000--Stanton STR8-80--QSC K12's--Crown Amplifier--Urei Monitors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •