# Ableton APC40 template - attached. **URL:** \ **Category:** Controller Mappings\ **Created:** [May 4, 2011, 1:08pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777 "2011-05-04T13:08:50Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [May 4, 2011, 1:08pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/1 "2011-05-04T13:08:50Z")
**Ableton APC40 template - attached.** Decided I’d post up my APC40 Ableton template, might be a starting point for someone 🙂 1-4 = Main decks 5-8 = FX / Sample Decks 8 “One Knob” FX on each channel. Gain / Bass visible on all channels. Independent Volume all channels. Scene stop/play disabled. Stop all clips disabled. EQ’s are set on 4 return tracks so channels 1/5 are effected by the same return channel, this is ideal if you use the 5-8 as Sample / FX as levels remain exactly the same. Gain is -15db / +3db EQ’s do NOT kill, I have them set to about -20db to +10dbs around Master output has Compressor / Limiter / Dynamics. Each channel is set to -3db’s To get the quantizing working I needed to use “Midistroke” and set the grid to use either cmd+9 for channel 5-8 or cmd+0 for channels 1-4 Credit to M-lovers for some of the rack effects. Oh and my reasoning for disabling the stop all/rec/play is I kept hitting them by accident = NOT GOOD !😃 ---
**Author:** ![dumitra](https://avatars.discourse-cdn.com/v4/letter/d/b4bc9f/32.png) [@dumitra](https://forum.djtechtools.com/u/dumitra)\ **Post date:** [July 4, 2011, 3:47pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/2 "2011-07-04T15:47:03Z")
thanks! will try it out ---
**Author:** ![minimal](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/minimal/32/15152_2.png) [@minimal](https://forum.djtechtools.com/u/minimal)\ **Post date:** [July 4, 2011, 4:27pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/3 "2011-07-04T16:27:31Z")
thanks d/l now. will give it a go 2nite. Been looking for a reason to work on my ableton skills. this might be it as long as i don’t get sucked into just djing with traktor & my vci again… ---
**Author:** ![Alessandro\_Savage](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/alessandro_savage/32/13225_2.png) [@Alessandro\_Savage](https://forum.djtechtools.com/u/Alessandro_Savage)\ **Post date:** [July 4, 2011, 5:43pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/4 "2011-07-04T17:43:00Z")
Might give this a go at some point. How did you implement the loop in/out? Did you just use midistroke for it? ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [July 5, 2011, 10:11pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/5 "2011-07-05T22:11:52Z")
**Revised Ableton APC40 DJ template for July** Attached is the latest version with a whole heap of revisions since I first posted including Monitor / Master Mix. Midi stroke is mainly used for just my quantize settings as I flip between nudge and play mode alot things start going outta sync otherwise the way I have it set up is below .. I’d post my prefs but I know for a fact my CC’s are quite unique in the APC world. **APC Settings** As before channels: 1-4 = Play tracks 5-8 = Record / Sample tracks I’ve ditched all the record/arm buttons from being controlled with the APC Stop = Loop In selected track Rec = Loop Out selected track Play = Loop Off selected track Track Selection = Actual Playing Track (as opposed to channel selection only) Clip Stop = FX on/off REC/ARM = Clip Stop Cue / Solo = CUE Cue Level = Headphone Master / Cue Mix (for in headphone cue/mix). Track Control Pan Selected = BASS/GAIN Track Control Send A Selected = Mid Top Faders 1/5 2/6 3/7 4/8 are linked to faders 1-4 Faders 5-8 are still able to be independently controlled… my reasoning for this is simple… 5-8 are FX / sample decks which will in all likelyhood be the same level normally as 1-4 if Its being used for FX. if being used for loops they have independent control. Its just one less fader to have to level out. **MidiStroke settings** sorry I cant post the midikey settings but you can get an idea of what I’m using them for and its easy enough to set up once you know the CC values. Scene Launch 1/5 are scroll up/down the Grid Scene Launch 2-4 are Quantize 1, 1/4, 1/8 Loop is set to Quantize 1 Bar Nudge is set to No Quantize All grid keys are mapped to 1 Bar & Follow mode. Hope it might give someone a starting point. Just a heads up - there is no headphone cue volume mapped, I generally keep things at the same level and figured the split was worth more to me than a volume. You can change the master on headphone level using the split cue rack in the master if you need to. Next on the list is some funky one button FX 🙂 ---
**Author:** ![dumitra](https://avatars.discourse-cdn.com/v4/letter/d/b4bc9f/32.png) [@dumitra](https://forum.djtechtools.com/u/dumitra)\ **Post date:** [July 5, 2011, 11:20pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/6 "2011-07-05T23:20:45Z")
Great deevey, will give it a try is there anyway to add some navigation funcionts? i mean browser and clip zoom in out funtions? thanks again! keep them coming ---
**Author:** ![silentfxx](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@silentfxx](https://forum.djtechtools.com/u/silentfxx)\ **Post date:** [July 8, 2011, 9:00pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/7 "2011-07-08T21:00:16Z")
Hey would you guys wouldn’t know why my cliplaunch buttons aren’t working anymore or the device control knobs or track control knobs only the track volume fader is working??? Thanks. ---
**Author:** ![silentfxx](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@silentfxx](https://forum.djtechtools.com/u/silentfxx)\ **Post date:** [July 8, 2011, 10:03pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/8 "2011-07-08T22:03:27Z")
nvm i fixed it 😃 ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [July 12, 2011, 5:01pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/9 "2011-07-12T17:01:33Z")
> [@](#): > > is there anyway to add some navigation funcionts? i mean browser and clip zoom in out funtions? I just assigned + - in midi stroke to my top and bottom scene launch keys for zoom, as they were pretty much not doing alot since the change to playing clip Regards the browser I cant see any way of improving things unless you are using bomes and a few other things .. i’d probably use the bank select perhaps for browser function. Can just “hope” Ableton have been listening in relation to peoples cries for assignable clip browsing and loading (amongst other things). 😃 > **[!!COMPLETE MOUSE-LESS MIDI CONTROL! CLICKABLE ACTIONS TOO!! - Ableton Forum](https://forum.ableton.com/viewtopic.php?f=4&t=56470)** Check the link for mouseless browsing if you want to try it. Love to hear some feedback on the template as it stands and any improvements. ---
**Author:** ![dumitra](https://avatars.discourse-cdn.com/v4/letter/d/b4bc9f/32.png) [@dumitra](https://forum.djtechtools.com/u/dumitra)\ **Post date:** [July 12, 2011, 5:28pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/10 "2011-07-12T17:28:46Z")
thanks deevey! unfortunatelly im too rookie to understand the MOUSELESS script tutorial. Anyway, is the (plus - minus) alreadi assigned on your last template ? thanks ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [July 12, 2011, 6:03pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/11 "2011-07-12T18:03:52Z")
Nope you’ll need to do it in midistroke .. I just reassigned the top and bottom scene launch buttons to two blank rack knobs on the master channel and 83/ch1 86/ch1 to “+” and “-” in midistroke. Your # might be different as it depends on the APC, there’s three variations of cc’s ---
**Author:** ![dumitra](https://avatars.discourse-cdn.com/v4/letter/d/b4bc9f/32.png) [@dumitra](https://forum.djtechtools.com/u/dumitra)\ **Post date:** [July 12, 2011, 7:16pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/12 "2011-07-12T19:16:19Z")
a little walktrhough on how to do that for APC users would be just great 0 ) ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [July 13, 2011, 1:05am UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/13 "2011-07-13T01:05:15Z")
How to do what exactly ? 😕 ---
**Author:** ![dumitra](https://avatars.discourse-cdn.com/v4/letter/d/b4bc9f/32.png) [@dumitra](https://forum.djtechtools.com/u/dumitra)\ **Post date:** [July 13, 2011, 3:48pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/14 "2011-07-13T15:48:13Z")
a walktrhough on how to assing those launch buttons to zoon in - out as you did, so we all can try to do the same. thanks in advance! ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [July 13, 2011, 9:35pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/15 "2011-07-13T21:35:26Z")
Same as assigning anything in midistroke .. find the number, assign the key :-S …I take it you did this already with the other keys ? You’ll need midi monitor to find the num/channel of anything you want to assign. ---
**Author:** ![MrAybar](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mraybar/32/14106_2.png) [@MrAybar](https://forum.djtechtools.com/u/MrAybar)\ **Post date:** [August 8, 2011, 12:34pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/16 "2011-08-08T12:34:06Z")
@deevey Thx a lot man!!! A question i dont have Keystroke but is it for windows only?? i have a mac!!! what can i do???😕 ---
**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\ **Post date:** [August 9, 2011, 12:08pm UTC](https://forum.djtechtools.com/t/ableton-apc40-template-attached/23777/17 "2011-08-09T12:08:19Z")
MidiStroke not Keystroke, Its a Mac Application [midiStroke](http://www.charlie-roberts.com/midiStroke/) One of my previous post images shows how I have mine setup - on Mac Also. You’ll need midi monitor also to find your particular APC key values as they do not all APC’s have the same values.