so i just completely sanded my jog wheels. i used 150 grit at first to get the paint off, and then i used 800 fine grit to smooth it out. i sanded in a circular motion (not around the jog, but in small swirls) and im happy with the results. it looks like it came out of the factory with swirls but its very smooth.
but before i go into the painting i was wondering how many coats should i put on? i also got a clear coat to protect the black. i was thinking 2 thin coats of black, and 2 thin coats of clear? can someone who has done this fill me in on what would be best? and should i use a primer? it says to use primer when painting on bare metal.
by the way i got krylon satin black and krylon satin clear. the satin is like a semi flat, but it’s not glossy at all. its sort of like an eggshell, except black of coarse.
Hey, just found out you can cover the jog wheels with vinyl. You have to make sure to let the screws have a direct connection to the surface of the wheel, ill post a picture later
You can go on ebay and buy it. And you can buy in a matte finish. I used a file to shave off the vinyl and peeled it off and used an exact-o knife for the body
search matte vinyl in ebay. use and excat-o blade or a razor blade and hug the walls. I would recommend taking a file and scraping the edges, if you do it deep enough and clean enough, it will fall right off. I would recommend upgrading to vinyl as they grip your fingertips, I no longer worry about my fingers slipping. Its a really east arts and craft project, your thinking about it too much. most it should cost is paying for the vinyl and your time.