# Adding dedicated power supply to DJ controller

**URL:** <https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151>\
**Category:** Hardware: Controllers, Mods and Gear\
**Created:** [August 27, 2015, 7:47pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151 "2015-08-27T19:47:45Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hanginon](https://avatars.discourse-cdn.com/v4/letter/h/e56c9b/32.png) [@Hanginon](https://forum.djtechtools.com/u/Hanginon)\
**Post date:** [August 27, 2015, 7:47pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/1 "2015-08-27T19:47:45Z")

</div>

**Adding dedicated power supply to DJ controller**

Hi all - I am new here.

Browsing the threads, there are numerous issues with USB only powered controllers - especially those with built in soundcards.

Instead of possibly creating more problems by using USB powered hubs, why not just cut the +5 VDC USB line inside the controller, put a simple +5 VDC regulator in it, a jack, and then attach a 1 amp wall wart. Hercules did this when going from the 4-MX to RMX2 controller.

Should eliminate power issues, and I bet sound better to - especially if the controller is driving long interconnects to self powered speakers.

---

<div class="post-metadata">

**Author:** ![the\_bastet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/the_bastet/32/56295_2.png) [@the\_bastet](https://forum.djtechtools.com/u/the_bastet)\
**Post date:** [August 27, 2015, 8:25pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/2 "2015-08-27T20:25:57Z")

</div>

Shouldn’t be too hard. I imagine it might cause backfeed on the usb cable. SOmeone correct me if IM wrong.

---

<div class="post-metadata">

**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\
**Post date:** [August 27, 2015, 8:49pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/3 "2015-08-27T20:49:39Z")

</div>

Or you could use a USB cable like Pioneer have for the WeGo that add’s power (designed as the iPad could not provide enough juice). Just hook it up to a decent USB phone charger 😉

The pioneer cable is insanely priced though, copies can be had for sub $15.

 ![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/2/6/26dd309d3bf3584d5dbb4873efbe14a0286a0698.jpeg)

---

<div class="post-metadata">

**Author:** ![the\_bastet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/the_bastet/32/56295_2.png) [@the\_bastet](https://forum.djtechtools.com/u/the_bastet)\
**Post date:** [August 27, 2015, 9:22pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/4 "2015-08-27T21:22:36Z")

</div>

> [@deevey](#):
>
> Or you could use a USB cable like Pioneer have for the WeGo that add’s power (designed as the iPad could not provide enough juice). Just hook it up to a decent USB phone charger 😉
> 
> The pioneer cable is insanely priced though, copies can be had for sub $15.
> 
> ![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/2/6/26dd309d3bf3584d5dbb4873efbe14a0286a0698.jpeg)

Must have now!

---

<div class="post-metadata">

**Author:** ![Patch](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/patch/32/118_2.png) [@Patch](https://forum.djtechtools.com/u/Patch)\
**Post date:** [August 28, 2015, 11:58am UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/5 "2015-08-28T11:58:19Z")

</div>

Now THAT is an intersting cable… 🤤

---

<div class="post-metadata">

**Author:** ![Hanginon](https://avatars.discourse-cdn.com/v4/letter/h/e56c9b/32.png) [@Hanginon](https://forum.djtechtools.com/u/Hanginon)\
**Post date:** [August 28, 2015, 2:27pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/6 "2015-08-28T14:27:23Z")

</div>

> [@the\_bastet](#):
>
> Shouldn’t be too hard. I imagine it might cause backfeed on the usb cable. SOmeone correct me if IM wrong.

The USB port has D+ and D- for Data, possibly referenced to GND, and then +VCC for 5 VDC, also referenced to GND.

If I cut the +VCC line to the laptop and only source the +5 VDC from the (new) internal regulator, you can still get feedback on the USB cable?

---

<div class="post-metadata">

**Author:** ![paradajz](https://avatars.discourse-cdn.com/v4/letter/p/dec6dc/32.png) [@paradajz](https://forum.djtechtools.com/u/paradajz)\
**Post date:** [August 28, 2015, 3:33pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/7 "2015-08-28T15:33:36Z")

</div>

> [@Patch](#):
>
> Now THAT is an intersting cable… 🤤

Isn’t that a simple Y-cable? You usually get them with portable HDD drives (since USB 2.0 couldn’t handle current required for HDD to work - USB 3 solved that). In fact, I have one right here.

 ![WP_20150828_005.jpg](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/0/5/0585a78029f644adef1852eb376db9fc708575a8.jpeg)

EDIT:

You can buy something like this:

> **[Pardon Our Interruption...](https://www.ebay.com/splashui/challenge?ap=1&appName=orch&ru=https%3A%2F%2Fwww.ebay.com%2Fitm%2F1FT-30cm-USB-2-0-A-Female-To-Dual-Male-Data-Splitter-Charger-Sync-Power-Y-Cable-%2F151550683684%3Fhash%3Ditem23491fea24&iid=8ac62748-02d7-4b7a-b805-0bd8b9948ab1&iim=EMTg0Lja&iia=EBEwNS45Qt&iiz=ZmWOS4zNg**ciN)**

Just plug cable from your controller into female port and you’re good to go.

---

<div class="post-metadata">

**Author:** ![deevey](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/deevey/32/10758_2.png) [@deevey](https://forum.djtechtools.com/u/deevey)\
**Post date:** [August 28, 2015, 5:33pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/8 "2015-08-28T17:33:21Z")

</div>

> [@paradajz](#):
>
> Isn’t that a simple Y-cable? You usually get them with portable HDD drives (since USB 2.0 couldn’t handle current required for HDD to work - USB 3 solved that).

Some laptops didn’t/don’t have enough juice on their USB ports to provide the full 500ma. I dont believe this was ever a 2.0 vs 3.0 problem

But yep, same concept anyhow, just with a full-size USB socket instead of Mini USB. No-one really needed a cable of that sort before DJ controllers and Ipad’s, hence pioneer cranking up the price I guess.

That other cable you posted would work I’m sure, but the cable looks very thin, which probably means zero shielding - never a good thing for audio devices. And fewer interconnects is better IMHO. Personally I spent the extra $10 just to be sure I don’t have problems. Damned if I’m paying $35 for an official Pioneer one 😛

> **[Amazon.com: C2G USB Cable, USB 2.0 Cable, USB B Male to Two A Male Cables, USB Y...](https://www.amazon.com/C2G-28108-USB-Cable-Y-Cable/dp/B0013LSFJI)**
>
> When a standard USB cable cannot transfer enough power to operate an external device, such as a portable 2.5in hard drive, you need a USB 2.0 y-cable. Simply plug this cable's USB B end into the device, and then plug the two USB A ends into open USB...

---

<div class="post-metadata">

**Author:** ![paradajz](https://avatars.discourse-cdn.com/v4/letter/p/dec6dc/32.png) [@paradajz](https://forum.djtechtools.com/u/paradajz)\
**Post date:** [August 28, 2015, 6:03pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/9 "2015-08-28T18:03:58Z")

</div>

> [@deevey](#):
>
> Some laptops didn’t/don’t have enough juice on their USB ports to provide the full 500ma. I dont believe this was ever a 2.0 vs 3.0 problem

Possibly, but USB 3.0 current limitation is raised to 900mA so that certainly helps.

Anyways price of that Pioneer cable is outrageous.

---

<div class="post-metadata">

**Author:** ![Hanginon](https://avatars.discourse-cdn.com/v4/letter/h/e56c9b/32.png) [@Hanginon](https://forum.djtechtools.com/u/Hanginon)\
**Post date:** [August 28, 2015, 10:17pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/10 "2015-08-28T22:17:38Z")

</div>

> [@the\_bastet](#):
>
> Shouldn’t be too hard. I imagine it might cause backfeed on the usb cable. SOmeone correct me if IM wrong.

USB has +D and -D (for data, possibly referenced to GND), GND, and VCC, the +5 VDC line.

If I cut the +5 VDC line from the controller to the laptop, I still might get feedback?

---

<div class="post-metadata">

**Author:** ![the\_bastet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/the_bastet/32/56295_2.png) [@the\_bastet](https://forum.djtechtools.com/u/the_bastet)\
**Post date:** [August 31, 2015, 1:37pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/11 "2015-08-31T13:37:01Z")

</div>

> [@Hanginon](#):
>
> USB has +D and -D (for data, possibly referenced to GND), GND, and VCC, the +5 VDC line.
> 
> If I cut the +5 VDC line from the controller to the laptop, I still might get feedback?

If there is no longer a 5VDC line from the laptop, then no. It really depends on the capacity and grounding of the controller. Just tried this on a WeGo tho and it worked fine with no issues.

---

<div class="post-metadata">

**Author:** ![Patch](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/patch/32/118_2.png) [@Patch](https://forum.djtechtools.com/u/Patch)\
**Post date:** [August 31, 2015, 4:25pm UTC](https://forum.djtechtools.com/t/adding-dedicated-power-supply-to-dj-controller/72151/12 "2015-08-31T16:25:35Z")

</div>

The interesting but for me was connecting the cable to a charger to deliver power to in-powered devices.

I feel kinda dumb for never trying that. 😞
