# All-in-one's with external mixers **URL:** \ **Category:** General Discussion\ **Tags:** external-mixing, traktor-s4\ **Created:** [May 30, 2011, 1:07am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941 "2011-05-30T01:07:40Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![djfck](https://avatars.discourse-cdn.com/v4/letter/d/45deac/32.png) [@djfck](https://forum.djtechtools.com/u/djfck)\ **Post date:** [May 30, 2011, 1:07am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/1 "2011-05-30T01:07:40Z")
**All-in-one’s with external mixers** Looking at changing my setup to something akin to the S4, Pioneer ddj-t1, or denon mc6000. However, I am adamant about having something that doesn’t use traktor’s internal mixer; where looping, transport, etc are controlled via software, but full sounds signals then come to an integrated, but physical mixer which does the eq, crossfading, volume sliders, etc. I couldn’t find enough useful information about each of these controllers. Can anyone offer some help? ---
**Author:** ![exokinetic](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/exokinetic/32/28_2.png) [@exokinetic](https://forum.djtechtools.com/u/exokinetic)\ **Post date:** [May 30, 2011, 1:12am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/2 "2011-05-30T01:12:56Z")
Well, the DN-MC6000 IS an actual physical mixer, and could accommodated what you describe… ---
**Author:** ![DoctorMogal](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/doctormogal/32/14704_2.png) [@DoctorMogal](https://forum.djtechtools.com/u/DoctorMogal)\ **Post date:** [May 30, 2011, 1:35am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/3 "2011-05-30T01:35:26Z")
Also the NS6 which is coming out is standalone. But i’d stick with the MC6000. I’m going to get my hands on one of those sooner or later 😕 ---
**Author:** ![karma](https://avatars.discourse-cdn.com/v4/letter/k/bcef8e/32.png) [@karma](https://forum.djtechtools.com/u/karma)\ **Post date:** [May 30, 2011, 1:36am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/4 "2011-05-30T01:36:15Z")
Xone DX is a mixer too. ---
**Author:** ![MuzicFreq](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/muzicfreq/32/13385_2.png) [@MuzicFreq](https://forum.djtechtools.com/u/MuzicFreq)\ **Post date:** [May 30, 2011, 2:11am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/5 "2011-05-30T02:11:13Z")
NS6 is a 4 channel mixer as well nvm I has been beaten😞 ---
**Author:** ![djfck](https://avatars.discourse-cdn.com/v4/letter/d/45deac/32.png) [@djfck](https://forum.djtechtools.com/u/djfck)\ **Post date:** [May 30, 2011, 2:31am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/6 "2011-05-30T02:31:00Z")
So if I use the NS6 or MC6000, I’m still using the external mixer even when taking sound from traktor as opposed to a CD player, turntable or whatever? ---
**Author:** ![DoctorMogal](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/doctormogal/32/14704_2.png) [@DoctorMogal](https://forum.djtechtools.com/u/DoctorMogal)\ **Post date:** [May 30, 2011, 2:37am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/7 "2011-05-30T02:37:23Z")
Theres an option in Traktor where you choose internal/external mixing. ---
**Author:** ![V-Hoff](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/v-hoff/32/11759_2.png) [@V-Hoff](https://forum.djtechtools.com/u/V-Hoff)\ **Post date:** [May 30, 2011, 3:03am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/8 "2011-05-30T03:03:46Z")
I would do a iPAD with a external interface with 8 outs + mixer 4 channels. If you lack space for your touch commands, just buy another one 😃 I think you can find an used ipad1 16gb without 3g very cheap right now This will be exactly my setup 🙂 ---
**Author:** ![karma](https://avatars.discourse-cdn.com/v4/letter/k/bcef8e/32.png) [@karma](https://forum.djtechtools.com/u/karma)\ **Post date:** [May 30, 2011, 4:02am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/9 "2011-05-30T04:02:56Z")
Xone 4D ---
**Author:** ![mix\_architekt](https://avatars.discourse-cdn.com/v4/letter/m/49beb7/32.png) [@mix\_architekt](https://forum.djtechtools.com/u/mix_architekt)\ **Post date:** [May 30, 2011, 6:08am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/10 "2011-05-30T06:08:22Z")
the xone dx is not a mixer, it’s a midi controller with an integrated audio interface. when used with traktor or itch, the mixing is happening in the software - even for external sources. you have one stereo channel for the master, the other for the headphone cue bus. aux outs for what ever else you want, but not the 4 direct deck outputs and mixing section as the OP requested. the denon mc6000 is also not going to give you external mixing for traktor. it’s audio interface is 2 stereo channels, one for the master, the other for the cue bus. similar to the dx in that respect. it’s different in that it has an analogue mix option, but it’s for external sources, not the usb interface. the xone 4D is a proper mixer with an integrated audio interface and midi control. it’s totally brilliant and offers a best of both worlds solution for external mixing of 4 decks, and total control over traktor. i’ve got detailed midi maps and a user guide for it on my site. a xone DB4 is another solution that provides effective midi control, and external mixing. i’ve retired my 4D since the DB4 arrived. midi maps for that on my site as well. ---
**Author:** ![diezdiazgiant](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/diezdiazgiant/32/14025_2.png) [@diezdiazgiant](https://forum.djtechtools.com/u/diezdiazgiant)\ **Post date:** [May 30, 2011, 7:37am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/11 "2011-05-30T07:37:50Z")
Numark v7 fits that bill but it doesn’t run with traktor ---
**Author:** ![exokinetic](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/exokinetic/32/28_2.png) [@exokinetic](https://forum.djtechtools.com/u/exokinetic)\ **Post date:** [May 30, 2011, 7:41am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/12 "2011-05-30T07:41:31Z")
> [@mix\_architekt](#): > > the xone dx is not a mixer, it’s a midi controller with an integrated audio interface. when used with traktor or itch, the mixing is happening in the software - even for external sources. you have one stereo channel for the master, the other for the headphone cue bus. aux outs for what ever else you want, but not the 4 direct deck outputs and mixing section as the OP requested. > > the denon mc6000 is also not going to give you external mixing for traktor. it’s audio interface is 2 stereo channels, one for the master, the other for the cue bus. similar to the dx in that respect. it’s different in that it has an analogue mix option, but it’s for external sources, not the usb interface. > > the xone 4D is a proper mixer with an integrated audio interface and midi control. it’s totally brilliant and offers a best of both worlds solution for external mixing of 4 decks, and total control over traktor. i’ve got detailed midi maps and a user guide for it on my site. > > a xone DB4 is another solution that provides effective midi control, and external mixing. i’ve retired my 4D since the DB4 arrived. midi maps for that on my site as well. Did not realize that, valuable insight. ---
**Author:** ![MuzicFreq](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/muzicfreq/32/13385_2.png) [@MuzicFreq](https://forum.djtechtools.com/u/MuzicFreq)\ **Post date:** [May 30, 2011, 8:13am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/13 "2011-05-30T08:13:28Z")
What ever did happen to that beastly X7 that was supposed to be like one of the best digital mixers? They had price listings at one point then POOF it vanished of the face of the internet ---
**Author:** ![fullenglishpint](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/fullenglishpint/32/12539_2.png) [@fullenglishpint](https://forum.djtechtools.com/u/fullenglishpint)\ **Post date:** [May 30, 2011, 9:11am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/14 "2011-05-30T09:11:28Z")
> [@MuzicFreq](#): > > What ever did happen to that beastly X7 that was supposed to be like one of the best digital mixers? > They had price listings at one point then POOF it vanished of the face of the internet what, this? [http://www.djdeals.com/numarkX7.htm](http://www.djdeals.com/numarkX7.htm) ---
**Author:** ![MuzicFreq](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/muzicfreq/32/13385_2.png) [@MuzicFreq](https://forum.djtechtools.com/u/MuzicFreq)\ **Post date:** [May 30, 2011, 9:15am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/15 "2011-05-30T09:15:32Z")
> [@fullenglishpint](#): > > what, this? > > [http://www.djdeals.com/numarkX7.htm](http://www.djdeals.com/numarkX7.htm) yeah that… Numark doesnt even have it up on their site anymore and it’s just kinda disappeared. was looking forward to it. 😞 ---
**Author:** ![fullenglishpint](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/fullenglishpint/32/12539_2.png) [@fullenglishpint](https://forum.djtechtools.com/u/fullenglishpint)\ **Post date:** [May 30, 2011, 9:33am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/16 "2011-05-30T09:33:02Z")
> [@MuzicFreq](#): > > yeah that… Numark doesnt even have it up on their site anymore and it’s just kinda disappeared. was looking forward to it. 😞 Oh yeh… how odd. They only seem to do the X5. On a semi-related note, I just read the V7 product description and lol’d: > [@Numark Website](#): > > **PORTABLE PLAYER** > > Take it to the streets. Even with its complete list of professional features, V7 won’t weigh you down when you’re on the move. **The size of a traditional turntable, just pack up a pair of V7s and throw them over your shoulder**. ---
**Author:** ![MuzicFreq](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/muzicfreq/32/13385_2.png) [@MuzicFreq](https://forum.djtechtools.com/u/MuzicFreq)\ **Post date:** [May 30, 2011, 9:37am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/17 "2011-05-30T09:37:58Z")
> [@fullenglishpint](#): > > Oh yeh… how odd. They only seem to do the X5. > > On a semi-related note, I just read the V7 product description and lol’d: lol and watch those V7s break 😛 ---
**Author:** ![fullenglishpint](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/fullenglishpint/32/12539_2.png) [@fullenglishpint](https://forum.djtechtools.com/u/fullenglishpint)\ **Post date:** [May 30, 2011, 9:39am UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/18 "2011-05-30T09:39:43Z")
> [@MuzicFreq](#): > > lol and watch those V7s break 😛 haha yeh, right after you dislocate both of your shoulders simultaneously. ---
**Author:** ![photojojo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/photojojo/32/14618_2.png) [@photojojo](https://forum.djtechtools.com/u/photojojo)\ **Post date:** [May 30, 2011, 1:10pm UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/19 "2011-05-30T13:10:23Z")
Denon DNX1600 is Traktor Scratch Certified. ---
**Author:** ![padi\_04](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/padi_04/32/56291_2.png) [@padi\_04](https://forum.djtechtools.com/u/padi_04)\ **Post date:** [May 30, 2011, 1:12pm UTC](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941/20 "2011-05-30T13:12:51Z")
> [@fullenglishpint](#): > > haha yeh, right after you dislocate both of your shoulders simultaneously. Winning [Next page](https://forum.djtechtools.com/t/all-in-ones-with-external-mixers/24941.md?page=2)