# audio 6 multicores? **URL:** \ **Category:** General Discussion\ **Tags:** dvs, audio-6-dj, multicore, analogue, analog\ **Created:** [October 25, 2011, 8:06pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727 "2011-10-25T20:06:55Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![thosetentacles](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@thosetentacles](https://forum.djtechtools.com/u/thosetentacles)\ **Post date:** [October 25, 2011, 8:06pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/1 "2011-10-25T20:06:55Z")
**audio 6 multicores?** Hi there! doin a little research for a friend, anybody know if the NI audio 6 can be hooked up with multicores to give seamless switching via phono/line switch from timecode vinyl to regular vinyl? or is that exclusively audio 8 and up? I asked this on skratchlounge and someone suggested I check here. Thanks in advance! ---
**Author:** ![thosetentacles](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@thosetentacles](https://forum.djtechtools.com/u/thosetentacles)\ **Post date:** [October 25, 2011, 8:13pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/2 "2011-10-25T20:13:13Z")
and I should have put this in general huh… derp ---
**Author:** ![Ed\_Paris](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/ed_paris/32/13850_2.png) [@Ed\_Paris](https://forum.djtechtools.com/u/Ed_Paris)\ **Post date:** [October 25, 2011, 8:19pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/3 "2011-10-25T20:19:27Z")
no multicore won´t work with audio6. ---
**Author:** ![thosetentacles](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@thosetentacles](https://forum.djtechtools.com/u/thosetentacles)\ **Post date:** [October 25, 2011, 8:22pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/4 "2011-10-25T20:22:54Z")
dag! any workaround ideas to accomplish this without unplugging and replugging would be very helpful ---
**Author:** ![thosetentacles](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@thosetentacles](https://forum.djtechtools.com/u/thosetentacles)\ **Post date:** [October 25, 2011, 8:41pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/5 "2011-10-25T20:41:17Z")
I’m thinkin you could split the signal directly from the tt and have one go to the interface back around to line, the other one go straight to phono. then the line phono switches would control which source. right? Please let me know if my logic is flawed or if this would adversely effect signal strength. ---
**Author:** ![paw\_20](https://avatars.discourse-cdn.com/v4/letter/p/90ced4/32.png) [@paw\_20](https://forum.djtechtools.com/u/paw_20)\ **Post date:** [October 26, 2011, 12:08am UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/6 "2011-10-26T00:08:07Z")
very interested in this answer. I know that you can set the interface to thru in the software (at least if you’re using traktor you can), but I feel like the sound quality is definitely affected. playing real vinyl this way sounds like grainy in the not-good digital way. not sure if anyone notices but I definitely can. right now the combination of this and library management in traktor makes me want to save for an sl2. I think i remember seeing pcb boards for technics that had a switchable phono/line output (like an integrated preamp) and two sets of RCAs. not sure if they could output on both sets of RCAs though. ---
**Author:** ![reboot](https://avatars.discourse-cdn.com/v4/letter/r/b38774/32.png) [@reboot](https://forum.djtechtools.com/u/reboot)\ **Post date:** [October 27, 2011, 6:39am UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/7 "2011-10-27T06:39:24Z")
Thinking of doing this myself (when my mixer finally comes back from repair…). I thought I would be using these splitter cables: > **[PROCAB | Professional high quality cables and connectors](https://procab.be/error-404.html)** > > PROCAB offers reliable high quality video, audio & data cables for the professional rental, fixed install and home market. Is there any difference between using these and the Traktor Multicores, apart from the connector in the middle of the multicore cable ? I didn’t think there would be, but if Earl Panda is right there must be some “intelligence” in the Multicore cables for them to be aware of which soundcard they are connected to… ? ---
**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\ **Post date:** [October 27, 2011, 11:54am UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/8 "2011-10-27T11:54:55Z")
> [@thosetentacles](#): > > and I should have put this in general huh… derp sorted ---
**Author:** ![lethal\_pizzle](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lethal_pizzle/32/11770_2.png) [@lethal\_pizzle](https://forum.djtechtools.com/u/lethal_pizzle)\ **Post date:** [October 27, 2011, 12:03pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/9 "2011-10-27T12:03:35Z")
Multicores work on anything. I use mine with my audio10. ---
**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\ **Post date:** [October 27, 2011, 12:04pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/10 "2011-10-27T12:04:37Z")
^ yep ---
**Author:** ![MrPopinjay](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mrpopinjay/32/14471_2.png) [@MrPopinjay](https://forum.djtechtools.com/u/MrPopinjay)\ **Post date:** [October 27, 2011, 1:14pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/11 "2011-10-27T13:14:16Z")
> [@](#): > > no multicore won´t work with audio6. ---
**Author:** ![Ed\_Paris](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/ed_paris/32/13850_2.png) [@Ed\_Paris](https://forum.djtechtools.com/u/Ed_Paris)\ **Post date:** [October 27, 2011, 1:44pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/12 "2011-10-27T13:44:49Z")
> [@lethal\_pizzle](#): > > Multicores work on anything. I use mine with my audio10. i used it on both a6 and a10 and it didn´t work. maybe it´s my multicores and not the interface… ---
**Author:** ![MrPopinjay](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mrpopinjay/32/14471_2.png) [@MrPopinjay](https://forum.djtechtools.com/u/MrPopinjay)\ **Post date:** [October 27, 2011, 2:05pm UTC](https://forum.djtechtools.com/t/audio-6-multicores/31727/13 "2011-10-27T14:05:25Z")
Multicores are just (insanely over priced) Y shaped bits of wire. There actually isn’t any way that the interface could alter how they work.