Can anybody help me please

DJTT Gear & Custom Mods DJ TechTools' VCI-100 Product Support
1

Can anybody help me please

My unit will not power up after I installed the 1.3 firmware. Hooked everything back up properly and nothing. During flash I get “this file is not SRecord loading Raw data” It says successful at the end but nothing. I need help fast. Can anyone help me out. I see that someone else had this problem but there is no more comments about if they solved it.This is what I get when I flash:

Flash Development Toolkit and flash programming components
are provided without support

OS: Windows XP [Admin]
FDT API initialised: version 4, 02, 00, 008
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device ‘H8/3052F’ on ‘COM1’
Configuration:
‘BOOT Mode’ connection - using emulated interface
Opening port ‘COM1’ …
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0xAA
Using micro-Kernel : ‘C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1_2_00\uGen3052.cde’
Downloading and verifying micro kernel…
Device is erasing…
Erase Timeout value set to 21 seconds
Erase Successful
micro-Kernel download successful
Sending inquiry for getting line size
Buffer size has been set to default (128 bytes)
Sending selection of device command
Selection of Device - Device selected, code 0302
Sending selection of clock mode
Sending selection of clock mode
Selection of Clock Mode - Clock selected, code 0
Changing baud rate to 38400 bps
Set baud rate value = 38400
Downloading main kernel ‘C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1_2_00\Genm3052.cde’
Main kernel download complete…
Connection complete
Processing file :“C:\Program Files\vci-100se_13_firmware.zip” (This is where
Processing file :“C:\Program Files\vci-100se_13_firmware.zip” (raw data show)
Operation on User Flash
Downloaded the operation module
Writing image to device… [0x00000000 - 0x00005FFF]
Data programmed at the following positions:
0x00000000 - 0x00005FFF Length : 0x00006000
24 K programmed in 11 seconds
Image successfully written to device

2

if you look at this line:

Processing file :“C:\Program Files\vci-100se_13_firmware.zip” (This is where
Processing file :“C:\Program Files\vci-100se_13_firmware.zip” (raw data show)

you will see that you have loaded the zip file. You need to unzip that and load the .MOT file inside the zip.

3

help me please

Thanks ean. That worked but I have a question for you. I have a vci 100 silver edition. do the platter lights still lights up blue and when you touch them they turn red? Is this correct

4

I’m not Ean, but thats right!

5

Bpm

I been looking.. is there anyway to put in a manual bpm for tracks. Traktor doubled the bpm of some tracks.

6

Well, as I mentioned in a previous post.